Whirlpool GR395LXG warranty Oven Light, To replace the oven light, Press the oven light pad

Page 41

CARING FOR YOUR RANGE

REMOVING THE OVEN DOOR (CONT.)

2.Hold oven door so that the top edge of each hinge hanger is horizontal. Insert hinge hangers into the front frame hinge slots.

3.Tilt top of door toward range. Slide hinge hang- ers down onto front frame support pins.

NOTE: Make sure the hinge hangers are fully seated and engaged on the support pins.

Door stop	Range
clip
Door removal	Hinge
Door removal	hanger
pin hole
	Support pins

4.Insert the door stop clip with the angular surface at the top of the frame hinge slot, then push in the bottom of the clip until flanges are flush with the front frame.

5.Open the door completely and remove the door removal pins. Save door removal pins for future use.

6.Close the door.

Door removal pin hole

Front frame hinge slot

Angular

surface of door stop clip

THE OVEN LIGHT

The oven light will come on when you open the oven door.

To turn the light on or off when the oven door is closed:

•Press the oven light pad.

LIGHT

To replace the oven light:

1.Unplug range or disconnect power.

2.Remove the glass bulb cover in the back of the oven by turning it counterclockwise.

4.Replace the bulb cover by turning it clockwise.

3.Remove the light bulb from its socket.

Replace the bulb with a 40-watt appliance bulb.

5.Plug in range or reconnect power.

NOTE: The oven light will not work during the Self-Cleaning cycle.

41

Image 41

Contents 8272340A Cubic Foot OvenThank you for buying a Whirlpool appliance On next ANTI-TIP BracketImportant Safety Instructions For units with ventilating hood For self-cleaning rangesAccusimmer Control PanelAccubake Using the control knobs Using the Surface Cooking AreasUsing the Accusimmer feature Setting Recommended USESurface indicator Keep Warm element Using the Keep Warm elementKeep Warm Hot surface Surface indicator To set the Keep Warm elementUsing the ceramic glass cooktop Hot surface indicator lightsOptional canning kit Home canning informationTo protect your range Surface PanCookware with a non-stick finish has heating Cookware tipsRack placement for specific foods Using the OvenWhen YOU have Place Positioning racks and pansBakeware Choices Using Aluminum FoilMealtimer Using the control lockElectronic Oven Control Display/clockUsing the Electronic Minute Timer Setting the ClockExample for Example for ten minutesTo cancel the minute timer STARTING/CANCELING a FunctionPress Timer OFF Time of dayBAKING/ROASTING To choose between high and low volume tonesTones 350F Roasting meats and poultrySaving energy Factory settingAdjust by To display temperatures in C instead of FThis Number To Cook DegreesFront of rack BroilingExample shows broil at 325F To custom broil at a lower temperatureRack Minutes Meat Position Side Broiling guidelinesApproximate Time Baking/roasting time Example shows bake at 375F Press Cook TimeExample shows 30-minute Display counts down cook time Using the Electronic MEALTIMERª ControlTo delay start and stop automatically Example shows 2 o’clock start time When baking/roasting is done Ceramic glass cooktop models Oven VentCoil element model Removing the storage drawerTips Before you start the Self-Cleaning cycle, make sure youBefore YOU Start Example shows 41⁄2-hour cleaning time Setting the ControlsExample for 230 start time Example for 41⁄2-hour cycleHOW the Cycle Works To stop the self-cleaning cycle at any timeCaring for Your Range Cleaning ChartCleaning Chart GR399LXH Replacing RemovingCoil Elements and Reflector Bowls Model GR395LXG LIFT-UP Cooktop Model GR395LXG To replace Removing the Oven DoorTo remove To replace the oven light Oven LightFront frame hinge slot Angular Surface of door stop clip Press the oven light padProblem Cause When SELF-CLEANING Your OvenProblemcause Range does not WorkDisplay Messages Cooking ResultsOur consultants provide assistance with Requesting Assistance or ServiceTopic IndexWhirlpool Corporation will not PAY for WarrantyFull FIVE-YEAR