ICE and Water Dispenser Features

Automatic Ice and Water Dispenser

The ice and water dispenser conveniently dispenses chilled water, and ice cubes or crushed ice, depending on the model.

To operate the ice dispenser, select the ice option desired using the touchpad. Press a glass against the dispensing paddle as far up as possible to catch all ice. To stop dispensing ice, pull glass away from dispensing paddle. Do not remove the glass until the ice has completely dispensed. (Complete instructions for the dispenser operation are attached to the inside of the freezer door.)

How the Water Dispenser Works

The water tank, located behind the drawers in the refrigerator compartment, automatically fills as water is dispensed. For proper dispenser operation, the recommended supply water pressure should fall between 20 psi and 100 psi.

Water pressure must not exceed 100 lbs. Excessive pressure may cause water filter to malfunction.

After the refrigerator is connected to the water supply, fill the water tank by drawing one glass of water. It may take about 1½ minutes after activating the dispenser paddle before water begins to fill this first glass. Continue flushing the system for 3 minutes to rid the tank and plumbing connections of any impurities. The water dispenser has a built in shutoff device that will stop the water flow after 3 minutes of continuous use. Simply release the dispenser paddle to reset the shutoff mechanism.

Chemicals from a malfunctioning softener can damage the ice maker. If the ice maker is connected to soft water, ensure that the softener is maintained and working properly.

How the Ice Dispenser Works

OFF

Wire

Signal Arm

ICE DISPENSER TIPS

The ice maker and container are located in the top of the freezer compartment. After the refrigerator is installed properly and has cooled for several hours, the ice maker can begin making ice within 24 hours. Air in new plumbing lines may cause the ice maker to cycle two or three times before making a full tray of ice. To begin ice production, lower the wire signal arm to the "down" or ON position. With no usage it will take approximately 2 days to fill the ice container. The ice maker turns off automatically when the ice container becomes full. To stop the ice maker, lift the wire signal arm until it clicks, and locks in the "up" or OFF position.

Because of new plumbing connections, the first production of ice cubes may be discolored or have an odd flavor. These should be discarded until the cubes made are free of discoloration and taste.

•Ice cubes stored too long may develop an odd flavor. Empty the ice container and ensure that the wire signal arm is in its “down” or ON position. The ice maker will then produce more ice.

•Occasionally shake the ice container to keep ice separated.

•Keep the wire signal arm in its “up” or OFF position until the refrigerator is connected to the water supply or whenever the water supply is turned off.

IMPORTANT: Your ice maker is shipped with the wire signal arm in the ON position. To ensure proper function of your ice maker, hook up water supply immediately or turn ice maker OFF by lifting the wire signal arm until it clicks and locks in the UP position. If the icemaker is not turned off and the water supply is not connected, the water valve will make a loud chattering noise.

If the dispensing paddle is pushed for more than 4 minutes, the dispenser motor may overload and stop. The overload protector will reset automatically after 3 or 4 minutes.

•If a large quantity of ice is needed at one time, it is best to remove cubes directly from the ice container.

•The following sounds are normal when the ice maker is operating:

•	Motor running	•	Running water
• Ice dropping into ice container		• Stop the ice maker when cleaning the freezer and during vacations.
• Water valve opening or closing		•	If the ice maker will be turned off for a long period of time, turn the
•	Ice loosening from tray		water supply valve to the closed position.
			12

241512200A specifications

Electrolux has been a trusted name in home appliances for decades, and the Gibson 241512200A is a prime example of their commitment to quality and innovation. This model combines versatility with advanced technology to elevate the cooking experience, making it an ideal choice for modern kitchens.

One of the standout features of the Gibson 241512200A is its spacious design. With a generous interior capacity, this appliance can accommodate large dishes, making it particularly suitable for families or those who enjoy entertaining. The thoughtful layout allows for easy organization and access, so users can find their cooking essentials without hassle.

The Gibson 241512200A utilizes advanced cooking technologies that enhance its performance. It features precise temperature control, which ensures that food cooks evenly and to perfection. This is especially important for baking and roasting, where consistent heat is critical. Additionally, the appliance incorporates innovative heating elements that contribute to faster cooking times, saving users valuable time in the kitchen.

Another remarkable technology integrated into the Gibson 241512200A is its user-friendly interface. The digital control panel is intuitive, allowing users to adjust settings with the touch of a button. This feature is complemented by a variety of cooking presets, which simplify meal preparation by automatically setting optimal cooking times and temperatures for different dishes.

Safety is also a major consideration in the design of the Gibson 241512200A. The appliance comes equipped with features such as an automatic shut-off function that provides peace of mind, especially for busy households. The cool-touch exterior ensures that the surface remains safe to touch during and after cooking, minimizing the risk of burns.

In terms of energy efficiency, the Gibson 241512200A excels as well. It is designed to consume minimal energy without compromising performance, making it an environmentally friendly option for consumers looking to reduce their carbon footprint.

In conclusion, the Electrolux Gibson 241512200A stands out due to its combination of spacious design, advanced cooking technologies, user-friendly interface, safety features, and energy efficiency. This appliance truly encapsulates what a modern kitchen needs, making it an essential tool for both novice cooks and seasoned chefs alike. Its blend of functionality and innovation ensures that users can enjoy a seamless cooking experience, resulting in delicious meals for family and friends.