Installation Instructions, PrepareLocation

INSTALLATION INSTRUCTIONS

PrepareLocation

■It is recommended that the vent system be installed before hood is installed.

■Before making cutouts, make sure there is proper clearance within the ceiling or wall for exhaust vent.

■Check your ceiling height and the hood height maximum before you select your hood.

1.Disconnect power.

2.Determine which venting method to use: roof, wall, or non- vented.

3.Select a flat surface for assembling the range hood. Place covering over that surface.

WARNING

Excessive Weight Hazard

Use two or more people to move and install range hood.

Failure to do so can result in back or other injury.

4.Using 2 or more people, lift range hood onto covered surface.

Range Hood Mounting Screws Installation

5.Determine and mark the centerline on the wall where the canopy hood will be installed.

6.Select a mounting height between a minimum of

24" (61.0 cm) for an electric cooking surface, a minimum

of 27" (68.6 cm) for a gas cooking surface, and a suggested maximum of 36" (91.4 cm) above the range to the bottom of the hood. Mark a reference line on the wall.

7.Tape template in place, aligning the template centerline and bottom of template with hood bottom line and with the centerline marked on the wall.

DRILL2 (TW O)3/16"PILOTHOLESTHROUGH STUDSOR REAR W ALLSUPPORT

Vertical
Centerline	REAR W ALL

M OUNTING TEM PLATE

ALIGN BOTTOM EDGE

W ITH PENCILLINE

INDICATING BOTTOM

OFTHEHOOD

Installation Height

HorizontalLine

A.Centerline

B.Fastener locations

C.Mounting height reference

8.Mark centers of the fastener locations through the template to the wall.

IMPORTANT: All canopy mounting screws must be installed into wood. If there is no wood to screw into, additional wall framing supports may be required.

Remove the template.

9.Drill ³⁄₁₆" (4.8 mm) pilot holes at all locations where screws are being installed into wood.

10.Install 2 - 5 x 45 mm mounting screws. Leave a ¹⁄₄" (6.4 mm) gap between the wall and the back of the screw head to slide range hood into place.

¹⁄₄" (6.4 mm)

Vent Cover Support Bracket Installation

Installations using telescoping upper and lower vent cover assembly

1.Position vent cover bracket on wall about ¹⁄₈" (3.0 mm) away from the ceiling.

2.Mark the hole locations.

3.Drill ³⁄₈" (9.5 mm) holes for wall anchors and insert anchors flush with the wall.

A. 8 x 40 mm drywall anchors

B. Centerline on wall

C. Vent cover support bracket

D. 5 x 45 mm screws

4.Attach vent cover support bracket to wall.

Complete Preparation

1.Determine and make all necessary cuts in the wall for the vent system. Install the vent system before installing the hood. See “Venting Requirements” section.

2.Determine the required height for the home power supply cable and drill a 1¼" (3.2 cm) hole at this location.

3.Run the home power supply cable according to the National Electrical Code or CSA Standards and local codes and ordinances. There must be enough ½" conduit and wires from the fused disconnect (or circuit breaker) box to make the connection in the hood’s electrical terminal box.

NOTE: Do not reconnect power until installation is complete.

4.Use caulk to seal all openings.

GXW7230DAS specifications

The Whirlpool GXW7230DAS is a powerful and efficient range hood designed to enhance your kitchen environment while providing exceptional performance and contemporary style. With an array of features and advanced technologies, it seamlessly blends functionality with aesthetic appeal.

One of the main features of the GXW7230DAS is its powerful ventilation system. Equipped with an internal blower, this range hood can deliver up to 400 CFM (cubic feet per minute) of airflow, effectively removing smoke, steam, and odors from your kitchen. This high airflow capability is particularly beneficial for kitchens that frequently engage in heavy cooking, ensuring a cleaner and more comfortable space.

The range hood offers a sleek design, available in stainless steel, which not only complements modern kitchen designs but also provides durability and ease of cleaning. The smooth surface helps resist fingerprints, making maintenance a breeze. Additionally, its under-cabinet installation saves space while positioning the unit conveniently above your cooking area.

Another remarkable characteristic of the GXW7230DAS is its variable speed fan control. Home cooks can choose from multiple fan speeds, allowing them to customize the ventilation based on the level of cooking activity. For light cooking, a lower setting suffices, while heavy-duty cooking can utilize the higher speeds for maximum efficiency.

The integrated LED lighting is another highlight of this model, providing bright illumination over the cooking surface. The energy-efficient bulbs enhance visibility while cooking and lend a modern touch to your kitchen ambiance. With a simple switch, users can control the lighting independently of the fan, promoting both convenience and efficiency.

One of the standout technologies in the GXW7230DAS is the dishwasher-safe grease filters. These filters effectively capture grease and particulate matter, protecting the internal components of the hood. Their removable design and compatibility with dishwashers simplify maintenance and ensure optimal performance over time.

In terms of noise levels, this range hood operates quietly, especially at lower speeds, promoting a more enjoyable cooking experience without excessive disruption. Overall, the Whirlpool GXW7230DAS is a blend of design, performance, and convenience, making it an excellent choice for homeowners seeking to elevate their kitchen’s functionality while maintaining an attractive appearance.