Sealed Surface Burners, Home Canning | Whirlpool IGS325RQ1 instruction

REMEMBER: When range is in use or (on some models) during the Self-Cleaning cycle, the entire cooktop area may become hot.

Power failure

In case of prolonged power failure, the surface burners can be lit manually. Hold a lit match near a burner and turn knob counterclockwise to IGNITE. After burner lights, turn knob to setting.

Sealed Surface Burners

IMPORTANT: Do not obstruct the flow of combustion and ventilation air around the burner grate edges.

A. Burner cap

B. Burner base

C. Alignment pins

D.Igniter

E.Gas tube opening

Burner cap: Always keep the burner cap in place when using a surface burner. A clean burner cap will help avoid poor ignition and uneven flames. Always clean the burner cap after a spillover and routinely remove and clean the caps according to the “General Cleaning” section.

Gas tube opening: Gas must flow freely throughout the gas tube opening for the burner to light properly. Keep this area free of soil and do not allow spills, food, cleaning agents or any other material to enter the gas tube opening. Protect it from spillovers by always using a burner cap.

A.1-1¹⁄₂" (25-38 mm)

B.Burner ports

Burner ports: Check burner flames occasionally for proper size and shape as shown above. A good flame is blue in color, not yellow. Keep this area free of soil and do not allow spills, food, cleaning agents or any other material to enter the burner ports.

To Clean:

IMPORTANT: Before cleaning, make sure all controls are off and the oven and cooktop are cool. Do not use oven cleaners, bleach or rust removers.

1.Remove the burner cap from the burner base and clean according to “General Cleaning” section.

2.Clean the gas tube opening with a damp cloth.

3.Clean clogged burner ports with a straight pin as shown. Do not enlarge or distort the port. Do not use a wooden toothpick. If the burner needs to be adjusted, contact a trained repair specialist.

4.Replace the burner cap, making sure the alignment pins are properly aligned with the burner cap.

A.Incorrect

B.Correct

5.Turn on the burner. If the burner does not light, check cap alignment. If the burner still does not light, do not service the sealed burner yourself. Contact a trained repair specialist.

Home Canning

When canning for long periods, alternate the use of surface burners between batches. This allows time for the most recently used areas to cool.

■Center the canner on the grate.

■Do not place canner on 2 surface burners at the same time.

■For more information, contact your local agricultural department. Companies that manufacture home canning products can also offer assistance.

Cookware

IMPORTANT: Do not leave empty cookware on a hot surface cooking area, element or surface burner.

Ideal cookware should have a flat bottom, straight sides and a well-fitting lid, and the material should be of medium-to-heavy thickness.

Rough finishes may scratch the cooktop. Aluminum and copper may be used as a core or base in cookware. However, when used as a base they can leave permanent marks on the cooktop or grates.

Cookware material is a factor in how quickly and evenly heat is transferred, which affects cooking results. A nonstick finish has the same characteristics as its base material. For example, aluminum cookware with a nonstick finish will take on the properties of aluminum.

Cookware with nonstick surfaces should not be used under the broiler.

IGS325RQ1 specifications

The Whirlpool IGS325RQ1 is a high-quality gas range that combines modern design with practical features, catering to the needs of both amateur and professional cooks. This appliance is designed to enhance the cooking experience while ensuring efficiency and reliability in the kitchen.

One of the most notable features of the Whirlpool IGS325RQ1 is its spacious oven, which offers a generous capacity, making it ideal for preparing large meals or multiple dishes simultaneously. The oven is equipped with multiple cooking modes, including Bake, Broil, and Specialty options, providing flexibility and versatility in cooking methods. Furthermore, the oven uses a convection cooking system, which circulates hot air evenly throughout the interior, ensuring that food is cooked uniformly and efficiently, resulting in perfectly baked goods and evenly roasted meals.

The range top features four sealed burners that deliver a range of BTU outputs, allowing users to choose the right level of heat for each cooking task. The burners are designed for precision, from simmering sauces at low heat to boiling water quickly for pasta. The cast-iron grates provide a sturdy base for pots and pans, ensuring stability and durability while cooking.

In addition to its robust functionality, the Whirlpool IGS325RQ1 boasts a sleek and modern design that complements any kitchen décor. The stainless steel finish not only adds an elegant touch but also makes cleaning easier, as it resists fingerprints and smudges.

To enhance user convenience, this gas range includes features such as the AccuBake temperature management system, which monitors the oven's temperature and adjusts it as needed for consistent cooking results. The surface burner knob and oven controls are intuitive, providing ease of use for anyone in the kitchen.

Safety is also a priority, with features like the electronic ignition system, which eliminates the need for standing pilots, minimizing gas consumption and enhancing safety. Additionally, the oven includes a self-cleaning function that helps maintain hygiene without the need for harsh chemicals, making it easier to keep the appliance in top working condition.

In conclusion, the Whirlpool IGS325RQ1 gas range stands out due to its combination of performance, style, and user-friendly features, making it a valuable addition to any kitchen. Whether for daily meals or special occasions, this range provides the reliability and flexibility that modern home cooks demand.