Equator SB65, WB 65, WB 72, BB65 Loading Diagrams Selecting a Wash Program, Starting the Dishwasher

Page 10

User Instructions

Loading Diagrams - Continued

Selecting a Wash Program

 

To select the desired Wash Program, turn the Program

 

Selector Knob clockwise until the mark coincides with

 

the program required. NEVER TRY TO TURN THE

 

CONTROL COUNTER - CLOCKWISE.

 

Additional function keys

 

Your dishwasher has a number of additional function

 

keys, which have to be selected according to the WASH

 

PROGRAM desired. Reference the Wash Program

 

Guide on the dishwasher Control Panel, also listed on

 

Page 3.

Starting the Dishwasher

When starting the dishwasher, carefully follow these steps:

1. Check to make sure that the dishwasher is plugged-in and that there is power available to it.

2. Check the water tap or faucet to ensure it is in the "ON" position.

3. Check the Rinse Aid Dispenser Level indicator.

4. Load the various glasses, plates, cookware and cutlery as previously described.

5. Fill the Detergent Dispenser.

6. Select the desired Wash Program to suit the load.

7. Press the On/Off Button. The On/Off indicator light will illuminate and the selected wash program has begun.

Important - To open the door or interrupt the wash program at any time, always press the On/Off Button to the "Off" position first.

End-of-Cycle &

Unloading the Dishwasher

When the Program Knob reaches the Stop “0” position and the «Ready» indicator light on the con- trol panel illuminates, the selected wash program is complete.

Press the On/Off Button .

Turn off the water and unplug the dishwasher.

Emptying the Dishwasher

We recommend that you wait until the dishes are dry before removing them.

By opening the door slightly and allowing to stand a moment following the end of program, the final drying process will be accelerated.

Open the door completely and remove the dishes. Empty the lower rack first, preventing spillage of any residual water trapped in deep wells of cups or on more difficult to dry plastic items loaded in the upper rack.

The silverware/cutlery basket is easily removed from the lower basket for convenience in unloading.

10

Image 10
Contents Ožˆ˜G@m„›„’ Iš„’’„šŒ@iš˜›†šŒ User Instructions Table of Contens Introduction Six Wash optios Rack featuresLevel wash Important Safety Instructions Grounding InstructionsUser Instructions Dishwasher Component IdentificationProgram Control PanelsCombination Detergent & Rinse Aid Dispenser Rinse Aid DispenserLoading Diagrams Upper Rack Height AdjustmentLoading the Dishwasher Starting the Dishwasher Loading Diagrams Selecting a Wash ProgramEnd-of-Cycle Unloading the Dishwasher Upper Spray Arm Care and MaintenanceWash Filter Lower Spray ArmProblem with Possible Cause/Cure Helpful HintsTrouble-Shooting Symptoms Possible CureService & Repair Warranty WarrantyInstallation Instructions ContentsPreparation of the Cabinet Cabinet Opening DimensionsUnpack the Dishwasher ConnectionsWidth 23 1/8 Height 23 1/2 Thickness 1/8 max Procedure Preparation of the Dishwasher Fitting the Adjustable FeetFitting a Decorative Door Panel Electrical Connection Water ConnectionWith an Air Gap Drain ConnectionWithout an Air Gap Placement of the Dishwasher in the Cabinet Opening Adjustable Width StripsAdjustable Kickplate Final InstallationCorporate@office Sˆ˜œŒ†ˆZ@HXPPI@WWVMSUSX@O@ˆ˜œŒ†ˆ`ˆ-›„š˜„--’Œ„†ˆN†