Installation Instructions
Adjustable Kickplate
The adjustable kickplate can now be installed to cover the front feet and the exposed area beneath the dishwasher.
Remove the plastic filler panel as illustrated for better access.
To lower the kickplate into position slide the kickplate vertically via the mounting slots to cover the dishwasher feet.
Replace the plastic filler panel.
Final Installation
Connect the power cord, water and drain lines as previously described.
Open the water supply faucet to the full «On» position.
Inspect all connections for any possible water leaks.
Test dishwasher operation by selecting and starting the Rinse & Hold Program. Pay close attention to make sure the machine functions properly and that all connections are secure.
Profile of dishwasher with plastic filer panel removed
Door (when closed)
Screw mounting locations
KICKPLATE
IMPORTANT: If you encounter difficulty or a problem is noted with the dishwasher, please contact the Equator Service Center immediately
22