Equator WB 72, WB 65, SB65 Upper Rack Height Adjustment, Loading the Dishwasher, Loading Diagrams

Page 9

User Instructions

Upper Rack Height Adjustment

For your convenience, the upper rack can be adjusted to two possible settings: High or Low.

HIGH Upper Rack Position: In this position, clearance is maximized for larger items to be placed in the Lower Rack.

LOW Upper Rack Position: In this position, increased height is made available for tall glassware and medium sized plates in the Upper Rack.

Adjusting the Upper Rack (MANUALLY)

To change the position of the Upper Rack, follow these steps:

1.Pull the Upper Rack out to its extended position.

2.Twist the stoppers at the end of each runner to the “open” position.

3.Pull the Upper Rack out further, removing it from the runners.

4.Replace the Upper Rack onto the runners introducing the alternate set of rack rollers to the extended runners.

5.Once the rollers are in place, turn each stopper to its original "closed" position.

Flexi-Rack

If your dishwasher is equipped with a flexi-rack upper basket simply hold baket handles lift and lower to either raise or lower basket.

Loading the Dishwasher

Dishwasher Capacity: 12 standard place settings.

Remove leftover, bones and insoluble substances, before placing into the dishwasher. You need not rinse the dishes prior to loading them into the dishwasher.

The dishwasher provides an extremely high quality of wash performance. In some cases, depending on severity, it may be necessary to pre-soak certain items that have burnt or baked-on food substances.

Position tableware according to the size, strength, and dirtiness of the pieces.

Less dirty and delicate pieces such as glassware, cups, dessert plates, china or crystal, are to be placed in the upper rack with the open ends facing down.

Dirtier and more resistant pieces such as dinner plates, pots, pans and serving dishes, are to be placed in the lower rack. For a better wash, try to leave a small amount of space between plates. When loading the lower rack, ensure that the pieces are secure in their position with the soiled surfaces facing down toward the lower spray arm.

Silverware & Cutlery: Place these items in the Silverware Basket located on the lower tray.

When all the dishes are in place, roll the upper & lower racks back into the machine. Check to make sure that the both the upper & lower spray arms move freely by spinning them lightly with your hand.

Half load

If your dishwasher has a 1/2 button you can wash just half a set of crockery (6 standard place settings) on the upper rack.

To do this:

1.Select the wash program.

2.Press the 1/2 button on the control panel.

3.Place the crockery in the upper rack

Loading Diagrams

9

Image 9
Contents Ožˆ˜G@m„›„’ Iš„’’„šŒ@iš˜›†šŒ User Instructions Table of Contens Introduction Rack features Six Wash optiosLevel wash Grounding Instructions Important Safety InstructionsDishwasher Component Identification User InstructionsControl Panels ProgramRinse Aid Dispenser Combination Detergent & Rinse Aid DispenserUpper Rack Height Adjustment Loading DiagramsLoading the Dishwasher Loading Diagrams Selecting a Wash Program Starting the DishwasherEnd-of-Cycle Unloading the Dishwasher Wash Filter Care and MaintenanceUpper Spray Arm Lower Spray ArmHelpful Hints Problem with Possible Cause/CureSymptoms Possible Cure Trouble-ShootingService & Repair Warranty WarrantyContents Installation InstructionsUnpack the Dishwasher Cabinet Opening DimensionsPreparation of the Cabinet ConnectionsPreparation of the Dishwasher Fitting the Adjustable Feet Width 23 1/8 Height 23 1/2 Thickness 1/8 max ProcedureFitting a Decorative Door Panel Water Connection Electrical ConnectionDrain Connection With an Air GapWithout an Air Gap Adjustable Width Strips Placement of the Dishwasher in the Cabinet OpeningFinal Installation Adjustable KickplateSˆ˜œŒ†ˆZ@HXPPI@WWVMSUSX@O@ˆ˜œŒ†ˆ`ˆ-›„š˜„--’Œ„†ˆN† Corporate@office