Equator WP 818, SP 818 specs

YOU MAY NOT ADD TOO MUCH DETERGENT TO PREVENT THE FORMATION OF DEPOSITS BECAUSE OUR DISHWASHERS HAVE SPECIALLY-DESIGNED WATER SOFTENERS.

The dispenser must be refilled before the start of each wash cycle following the instructions provided in the" Wash Cycle Table".Our dishwashers use less detergent and rinse aid than conventional dishwashers. Generally, only one tablespoon of detergent is needed for a normal wash load. Also, more heavily soiled items need more detergent.

Always add the detergent just before starting dishwasher, otherwise it could get damp and will not dissolve properly.

Dishwasher detergent is corrosive! Take care to keep it out of reach of children.

To remove hard water spots, try the following:

Run dishes through a normal wash program.

Remove all metal dishware, such as cutlery, pans, etc., from the dishwasher.

Do not add detergent.

Pour two cups of vinegar into a bowl and set the bowl face

up on the lower rack of the dishwasher.

Run the dishes through a normal wash program.

If this doesn't work, try the same process with 1 / 4 cup of citric acid crystals instead of vinegar.

Use only detergent specifically made for use in dishwashers. Keep your detergent fresh and dry. Don't put powder detergent into the dispenser until You're ready to wash dishes.

To open the dispenser, turn the cap to the "open" (left) arrow and lift it out.

Pour the rinse aid into the dispenser, being careful not to overfill.

Replace the cap by inserting it aligned with "open" arrow and turning it to the closed (right) arrow.

The rinse aid is released during the final rinse to prevent water from forming droplets on your dishes that can leave spots and streaks. It also improves drying by allowing water to "sheet" off the dishes.

Our dishwashers are designed to use liquid rinse aids. The rinse aid dispenser is located inside the door next to the detergent dispenser. To fill the dispenser, open the cap and pour the rinse aid into the dispenser until the level indicator turns completely black. The dispenser holds about 100 ml of liquid rinse aid.

Be careful not to overfill the dispenser, because this could cause over sudsing. Wipe away any spills with a damp cloth. Don't forget to replace the cap before you close the dishwasher door. If you have soft water, you may not need rinse aid for

it may cause a white film to develop on your dishes.

54 6

A measured amount of rinse aid is released during the final rinse. As with detergent, the amount of rinse aid needed for your dishes depends on the hardness of the water in your area. Too much rinse aid can result in lather of foaming and cause cloudiness or steaks on your dishes. If the water in your area is very soft, you may not need rinse aid. If you do, you can dilute the rinse aid with an equal amount of water.

The rinse aid dispenser has six settings. Always start with the dispenser set on " 1 ". If spots and poor drying are problems, increase the amount of rinse aid dispensed by removing the dispenser lid and rotating the dial to "2". If the dishes still are not drying properly or are spotted, adjust the dial to the next higher number until your dishes are spot-free. We suggest you to set on "4" .

SP 818, WP 818 specifications

Equator WP 818 and SP 818 are notable models in the world of high-performance electric bicycles, designed to meet the demands of modern riders seeking both functionality and an eco-friendly commuting option. These e-bikes stand out for their combination of innovative technologies, robust features, and user-centric design.

At the heart of the Equator series is a powerful, yet efficient electric motor that provides smooth acceleration and the ability to tackle various terrains with ease. The motor's integration with a high-capacity lithium-ion battery enables long rides with minimal downtime. Riders can expect a range of up to 50 miles on a single charge, making these models ideal for both short commutes and longer journeys.

One of the main highlights of the WP 818 is its advanced pedal-assist system. This feature ensures that riders can easily customize their level of assistance based on their preferences and the terrain. Whether navigating through city streets or climbing hills, the pedal-assist system provides a natural riding experience, allowing users to enjoy the physical activity of cycling while benefiting from electric power when needed.

On the other hand, the SP 818 offers a distinctive set of features tailored towards sportier riders. With a lightweight aluminum frame, this model enhances performance by improving maneuverability and speed. The SP 818 is equipped with superior suspension technology, ensuring that the ride remains smooth and comfortable, even on uneven surfaces.

Both models prioritize safety and security. They come outfitted with high-quality disc brakes for reliable stopping power in various weather conditions. Additionally, the bikes feature bright LED lights, ensuring visibility during nighttime rides. The inclusion of puncture-resistant tires further adds to rider confidence and reduces the risk of getting stranded due to flat tires.

For tech-savvy users, the Equator WP 818 and SP 818 incorporate smart connectivity features. Riders can track their performance metrics, including speed, distance, and battery health, via a user-friendly smartphone app. This integration helps in maintaining optimal ride conditions and enhances the overall user experience.

In summary, the Equator WP 818 and SP 818 embody a blend of performance, technology, and versatility. Their powerful electric motors, advanced features, and attention to safety make these e-bikes a smart choice for anyone looking to combine practicality with excitement in their daily travels. Whether for commuting or leisurely rides, both models provide an exceptional experience on two wheels.