Troubleshooting, Removing the Oven Bottom

Removing the Oven Bottom

The oven bottom can be removed for standard cleaning of the oven.

Before cleaning, make sure the oven is completely cool.

To Remove:

1.Remove the oven racks.

2.Place fingers in the slots in the bottom panel.

1.Lip

3.Lift the rear of the panel up and back.

The lip at the front of the panel should clear the front frame of the oven cavity.

4.Lift the bottom up and out.

To Replace:

Reverse the steps above.

TROUBLESHOOTING

Try the solutions suggested here first in order to avoid the cost of an unnecessary service call.

Nothing will operate

■Is the power outlet properly wired and polarized?

Try another outlet to check for proper wiring and polarity.

■Is the power supply cord unplugged? Plug into a properly grounded 3 prong outlet.

■Has a household fuse been blown or has the circuit breaker been tripped?

Replace the fuse or reset the circuit.

■Is the main or regulator gas shutoff valve in the off position?

See Installation Instructions.

■Is the range properly connected to the gas supply? Contact a trained repair specialist or see Installation Instructions.

Surface burners will not operate

■Is this the first time the surface burners have been used? Turn on any one of the surface burner knobs to release air from the gas lines.

■Is the control knob set correctly? Push in knob before turning to a setting.

■Are the burner ports clogged?

On sealed burner models, see “Sealed Surface Burners” section.

On open burner models, see “Surface Burners” section.

■Is the pilot light out?

Light the surface burner pilots. (See “Pilot Lights” section.)

Surface burner flames are uneven, yellow and/or noisy

■Are the burner ports clogged?

On sealed burner models, see “Sealed Surface Burners” section.

On open burner models, see “Surface Burners” section.

■Is the burner damaged?

On models with caps, look for warped cap. Place cap, flat side-down, on a flat surface. If cap wobbles noticeably, it is warped. Place cap on different burner for further check of warping. Replace warped cap. Contact a trained repair specialist if the condition does not improve.

■On models with caps, are the burner caps positioned properly?

See “Sealed Surface Burners” section.

■Is the air/gas mixture correct?

Contact a designated service technician to check the air/gas mixture, or see the Installation Instructions.

■Is propane gas being used?

The appliance may have been converted improperly. Contact a trained repair specialist.

Surface burner makes popping noises

■Is the burner wet? Let it dry.

Cookware not level on cooktop

■Is the range level?

Level the range. (See the Installation Instructions.)

■Is the proper cookware being used?

Use cookware with a flat bottom. (See “Cookware” section.)

Excessive heat around cookware on cooktop

■Is the cookware the proper size?

Use cookware about the same size as the surface cooking area, element or surface burner. Cookware should not extend more than 1 in. (2.5 cm) outside the cooking area.

Oven will not operate

■Is the power outlet properly wired and polarized?

Try another outlet to check for proper wiring and polarity.

■Is this the first time the oven has been used?

Turn any one of the surface burner knobs on to release air from the gas lines.

■Is the oven temperature control knob set correctly? See “Cooktop/Oven Temperature Controls” section.

■Is the main or regulator gas shutoff in the off position? Contact a designated service technician or see the Installation Instructions.

336, TGP310, TGP302, Range specifications

Estate Range is a highly sought-after line of premium products that cater to discerning consumers who seek quality, elegance, and innovation. Known for its exceptional craftsmanship and attention to detail, Estate Range offers a variety of items, including home furnishings, outdoor equipment, and lifestyle accessories. Each piece is meticulously designed to elevate the user's living experience while ensuring functionality and durability.

One of the main features of Estate Range is its use of high-end materials. The line often incorporates sustainable woods, premium metals, and luxurious fabrics, demonstrating a commitment to environmental responsibility without sacrificing aesthetic appeal. These materials not only enhance the visual charm of the products but also contribute to their longevity, ensuring that each item can be treasured for years to come.

Technological innovation is also at the forefront of the Estate Range. Many items integrate smart technology, allowing for seamless connections to smartphones and smart home systems. For instance, outdoor furniture may come equipped with built-in charging ports, while smart home features could include adjustable lighting and climate control that synchronizes with user preferences. This blend of tradition and modernity makes Estate Range appealing to a tech-savvy audience.

Another characteristic of the Estate Range is its versatility. The products are designed to complement various décor styles, from contemporary minimalism to classic elegance. This adaptability allows consumers to invest in items that not only enhance their current space but also remain relevant as trends evolve.

The brand also emphasizes personalization, offering customization options that enable customers to select finishes, colors, and materials that reflect their individual tastes. This bespoke approach ensures that each piece is unique and aligns perfectly with the homeowner's vision.

Finally, Estate Range is dedicated to providing an unparalleled customer experience. From the moment of inquiry to post-purchase support, the brand prioritizes customer satisfaction. Knowledgeable staff are available to answer questions, provide guidance on product selection, and assist with installation and maintenance advice.

In summary, Estate Range is a premium collection that harmonizes elegance, innovation, and customer-centric design, making it a standout choice for those looking to enrich their living spaces with thoughtfully crafted products.