Gaggenau 538, 762 Installation and cutout dimensions, Furniture/fixtures, Planning information

Page 14

Planning information.

Location

Important

Do not install appliance ––outdoors

––in damp rooms

––in rooms with a risk of frost

The appliance should be installed in a dry, ventilated room. It may not be installed outdoors. The ambient temperature of the room must be between 55°F

(13°C) and 100°F (43°C).

The appliance should not be exposed to constant direct sunlight or excessive heat. If installation next to a heat source, such as an oven, radiator, etc. is unavoidable, use a suitable insulating plate or observe the following minimum distances from the heat source:

––1 ¼" (30 mm) from an electric cooking appliance,

––11 ¹³⁄₁₆" (300 mm) from an oil or solid-fuel cooking appliance.

Installation and cutout dimensions

It is important to observe the specified dimensions of the installation cutout for a trouble-free installation of the appliance and for the subsequent appearance of the door panel.

––In particular ensure that the cutout is square. Square- ness can be checked by suitable means, e.g. spirit level, diagonal measurements, etc.

––The side walls of the cutout must be flush. The minimum thickness of the side and top walls is ⅝" (16 mm). The minimum thickness of toe kick panel is ¼" (6 mm).

Furniture/fixtures

During installation, the appliance is fastened to adjacent and overhead furniture/fixtures and it is therefore essential that all such furniture/fixtures are well secured to the substructure or adjacent wall.

Flooring/substructure

Important

A fully loaded appliance is very heavy. Can weigh up to 1,200 lbs.

On account of the heavy weight of a fully loaded appliance, a load- bearing substructure is required. To ensure correct installation and function, the support must be flat, level and made of hard, rigid material. If in doubt, contact an architect or a building expert.

Refer to the following table for load-bearing capacity:

Appliance

Load bearing capacity

 

 

24" Refrigeration Column

890 lbs. / 400 kg

 

 

30" Refrigeration Column

1,110 lbs. / 500 kg

 

 

18" Freezer Column

560 lbs. / 250 kg*

 

 

24" Freezer Column

780 lbs. / 350 kg*

 

 

30" Freezer Column

950 lbs. / 425 kg

30" Bottom Freezer

900 lbs. / 410 kg

 

 

36" Bottom Freezer

1,200 lbs. / 540 kg

 

 

*without water dispenser

 

Electrical requirements

Important

Electrical shock hazard

––plug into a grounded 3-prong outlet ––do not remove grounding prong ––do not use an adapter

––do not use an extension cord

The appliance comes with a 3-wire power supply cord. UL listed in the USA.

The appliance requires a 3-wire receptacle that is fitted with a 15 Amp fuse or higher.

The receptacle must be installed by a licensed electrician only. For the installation position of the receptacle refer to diagram in ”Electrical Location.

Grounding instruction

This appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for the electric current.

Additional grounding procedure

Some local regulations may require a separate ground. In such cases, the required accessory ground wire, clamp and screw must be purchased separately. Never ground the appliance to plastic plumbing lines, gas lines or water pipes.

A 4-conductor cord shall be used when the appliance is installed in an area where local codes do not permit grounding through the neutral. Power supply cord must be replaced by a licensed electrician only.

186Refrigeration

Image 14
Contents Table of contents Multiple column installations with partition walls between Individual column installationsSide-by-Side installations SxS Installation optionsKitchen Cabinetry Illustration Appliance Door PanelCutout Niche Kitchen design - basic termsOffset Design, Flush Inset Design 25 635 mm cutout depth Standard Overlay Design 25 635 mm cutout depthFull Overlay Design 25 635 mm cutout depth European style kitchen cabinetry 24 610 mm cutout depthAdditional planning notes Door swivel rangeWall clearance RC/RF/RW Appliance dimensions & Wall clearance RB/RY bottom freezers Wall clearance RB/RYDimensions for the installation cavity Door panel dimensions Appliance widthCutout for an individual 30 refrigeration appliance Cutout for a 42 side-by-side combination Maximum distance Side-by-side combinationCombination Planning examplesCombination of 4 - alternative Distance larger thanDistance less than Planning information Installation and cutout dimensionsFurniture/fixtures Warranty Water locationVertical section, side view Toe-kick and venting grillUpper molding Toe-kick area/upper molding of cutout nicheRA 460 010 Heating kit RA 460 020 / 030 Connecting element for cabinet doorsRA 460 000 Side-by-Side kit RA 425

451, 299, 603, 538, 610 specifications

Gaggenau, a renowned name in the luxury kitchen appliance industry, presents a range of innovative products representing the epitome of modern culinary design and technology. Among its standout offerings are models 762, 756, 830, 690, and 265, each blending exceptional performance with sleek aesthetics.

The Gaggenau 762 is a top-of-the-line wall oven that features advanced steam cooking technology. With its Combi Steamer function, it allows users to cook dishes to perfection, maintaining moisture and flavor while enhancing nutritional value. The ergonomic design ensures seamless integration into kitchen spaces, and the intuitive touch control panel makes operation incredibly user-friendly. Additionally, the oven boasts automatic cleaning systems and a variety of cooking modes, allowing for personalized culinary experiences.

Meanwhile, the Gaggenau 756 model is known for its powerful induction cooktop technology, which provides precise temperature control and rapid heating. The cooktop includes multiple cooking zones, and with its intuitive operation, users can switch between settings with ease. It is designed for efficiency, boasting an automatic power adjustment feature that optimally regulates heat according to the size of the cookware. Furthermore, the sleek glass surface ensures not only ease of cleaning but also a stylish addition to any modern kitchen.

The Gaggenau 830 model takes convenience a step further with its integrated coffee machine. This appliance is a dream for coffee enthusiasts, featuring customizable brewing options that allow users to select their preferred strength and volume. The machine is equipped with a grinder, ensuring fresh coffee grounds every time, and its automatic cleaning cycle simplifies maintenance.

The Gaggenau 690 is an impressive wine climate cabinet, specially designed to store wine at optimal conditions. It features adjustable temperature zones, humidity control, and UV-resistant glass doors to protect the vintage. The elegant design enhances any culinary space while ensuring that every bottle is maintained in ideal conditions.

Lastly, the Gaggenau 265 is an advanced dishwasher known for its innovative features. With flexible loading options, it can accommodate a variety of dish sizes, and its efficient spray technology ensures thorough cleaning while conserving water and energy. Moreover, its whisper-quiet operation and stainless steel design make it a suitable choice for open-concept kitchens.

In summary, the Gaggenau 762, 756, 830, 690, and 265 models showcase the brand's commitment to blending functionality with luxurious design, making them perfect choices for discerning culinary enthusiasts who value both performance and aesthetics in their kitchen environments.