DCS C-24W installation manual Cabinet Preparation, Cooktop Installation

Page 4

CABINET PREPARATION

STEP 2: COOKTOP INSTALLATION

1.To ensure professional results, the cabinet and countertop openings should be prepared by a qualified cabinet worker.

2.The clearances shown in Fig.1 are required for installations of cooktop and islands.

3.The cooktop is designed to hang from the coun- tertop by its side flanges. The countertop how ever, must be strong enough to support this

heavy cooktop. It may be necessary to add a 2 x 4 corner brace (See Figs.3, 4, and 5). Another alternate would be to construct a deck to set the cooktop on.

4.The cooktop can be installed in various positions with the front either flush or projecting, depend- ing on the countertop depth. (See Fig.2 side

view of cooktop; see Figs.3-5 for alternate mounting positions.)

FIG. 6

Counter-Sunk Screws

26-3/8"

FIG. 2

12"

Countertop level

9" 1/2"

3" To Center Line

of Gas Inlet

22-5/8"

3/4" 23-3/8" 2"

Cabinet face for installation with projecting control panel

Cabinet face for installation with flush control panel

777fig07

FIG. 1

13" Min.

30" Min.,

36" Max.

18" Min.

counter top level

VENT HOOD

3" min each side

12" Min. to

 

Combustible

WALL

Each Side

,

Material

 

0" Rear Clearance (w/ backguard)

12" (w/out backguard)

0" Side Cutout Clearance

0" Bottom Clearance

CAUTION: 36" Min. to combustible material , from cooking surface

777fig12

as defined in the "National Fuel Gas Code" (ANSI Z223.1, Latest Editon).

>The level of the cooktop top must be at the same level or above the countertop level.

3

Image 4
Contents DCS-C-24W WOK Cooktop Model Table of Contents Safetyheaderprecautions PrecautionsCooktop Installation Cabinet PreparationIsland Installation Standard InstallationPlacing & Anchoring Electrical Placing & AnchoringElectrical Connections Recommended Grounding MethodElectrical Grounding Alternate Grounding MethodGAS Requirements GAS ConversionLP Conversion Hook UPBackguard Installation Test & AdjustmentAdjustable Low Setting Refer toFinalheaderchecklist Propane GAS Installation USE & CareheaderinstructionsPrecautionsheader C T I O N O N E S a F E T YCalifornia Proposition Before Usingheaderyour Appliance Using the wokUsingheaderthe WOK Electric Spark IgniterBurner Efficiency Control KnobCare &HEADERMAINTENANCE WOK PANWarrantyheader Length of WarrantyHOW to Obtain Service DCS will CoverLitho in USA 8-97 Part No

C-24W specifications

The DCS C-24W is a versatile and highly capable multi-role combat aircraft designed for modern warfare. This aircraft has garnered attention for its advanced features and specifications that cater to contemporary military needs. The C-24W is primarily designed for both air-to-air and air-to-ground missions, making it a formidable asset in any air force.

One of the main features of the C-24W is its powerful propulsion system, which consists of twin turbofan engines that provide exceptional speed and agility. The aircraft is capable of quick ascents and high-speed maneuvers, enabling it to evade enemy threats while engaging in combat. The engine design also allows for reduced fuel consumption, which translates to a longer operational range and increased mission versatility.

The C-24W boasts a cutting-edge avionics suite, integrating advanced digital fly-by-wire technology, allowing for precise control and enhanced safety. The cockpit is equipped with a state-of-the-art digital display system that provides pilots with real-time data on aircraft systems, terrain mapping, and enemy targets. The integration of artificial intelligence assists in combat decision-making, improving situational awareness and response time.

One of the standout characteristics of the C-24W is its stealth capabilities. The aircraft features a low observable design, which minimizes its radar signature, enabling it to conduct missions deep into enemy territory without being detected. This strategic advantage is further enhanced by its electronic warfare systems, capable of jamming enemy radar and communication systems, ensuring that the aircraft remains undetected while carrying out its objectives.

For armament, the C-24W can carry a diverse range of munitions, including air-to-air missiles, precision-guided bombs, and a variety of other ordinance types. This flexibility allows the aircraft to adapt to different mission requirements, making it effective in both air superiority and ground attack roles.

In terms of survivability, the C-24W is equipped with advanced countermeasure systems that provide protection against enemy missiles and fire. These advanced systems enhance not only the aircraft's longevity but also the success of the missions it undertakes.

Overall, the DCS C-24W is an impressive and sophisticated aircraft that reflects modern technological advancements. Its combination of speed, stealth, advanced avionics, and extensive weaponry makes it a critical component for any air combat strategy, ready to meet the challenges of today’s evolving battlefield.