DCS C-24W Backguard Installation, Test & Adjustment, Refer to, Adjustable Low Setting

Page 9

BACKGUARD INSTALLATIONHEADER-TEST & ADJUSTMENT

STEP 6: BACKGUARD INSTALLATION

The backguard must be installed when there is less than a 12” clearance between combustibles and back edge of cooktop. For island installations and other installations with over 12” clearance, and optional stainless steel trim channel is available to cover the backguard mounting flanges.

Refer to Fig.12

A.Slide backguard over the 2 flanges on the rear of the appliance. Fasten the back with two screws (See A Fig.12) provided. No screws are required behind the wok section.

B. Fasten the top of the backguard to the wall

with two screws through the backguard (See B.).

C.Place the backguard cap on top and fasten using the two counter-sunk screws provided.

FIG. 12

STEP 7: TEST & ADJUSTMENT

Check for proper burner flame characteristics and adjust the air shutter if necessary. Each burner and valve is indi- vidually checked at the factory prior to shipment but varia- tions in local gas supply may make adjustment necessary.

Burner flames should be blue and stable with no yellow tips, excessive noise or lifting. If any of these conditions exist, check that the regulator is installed with the arrow pointing towards the appliance, and that it is 5.0 inches w.c. Nat. gas; and 10.0 inches for propane.

If this condition persists, the air shutters should be adjust- ed. Begin by removing the valve panel using the access hole provided, loosen the air shutter locking screw on the face of the burners mixing head.

If the flame is too yellow, indicating insufficient air, adjust the shutter to increase the air inlet.

If the flame is noisy or tends to lift away from the burner, indicating too much air, adjust the shutter to decrease the inlet.

The burner flame should be 1-1/2 to 2-1/2 inches high.

Adjustable - Low Setting:

The open top burner valve used on your cooktop has an adjustable low setting. Each valve is individually tested and adjusted on the appliance prior to shipment. Due to fluctuations in gas pressure and heating valve, you may feel it necessary to increase or decrease the gas flow at the low position.

FIG. 13

8

Page 8 Page 10
Image 9
Page 8 Page 10
Contents DCS-C-24W WOK Cooktop Model Table of Contents Precautions SafetyheaderprecautionsCabinet Preparation Cooktop InstallationStandard Installation Island InstallationPlacing & Anchoring Placing & Anchoring ElectricalElectrical Connections Recommended Grounding MethodAlternate Grounding Method Electrical GroundingGAS Conversion GAS RequirementsLP Conversion Hook UPTest & Adjustment Backguard InstallationAdjustable Low Setting Refer toFinalheaderchecklist USE & Careheaderinstructions Propane GAS InstallationC T I O N O N E S a F E T Y PrecautionsheaderCalifornia Proposition Using the wok Before Usingheaderyour ApplianceElectric Spark Igniter Usingheaderthe WOKBurner Efficiency Control KnobWOK PAN Care &HEADERMAINTENANCELength of Warranty WarrantyheaderHOW to Obtain Service DCS will CoverLitho in USA 8-97 Part No

C-24W specifications

The DCS C-24W is a versatile and highly capable multi-role combat aircraft designed for modern warfare. This aircraft has garnered attention for its advanced features and specifications that cater to contemporary military needs. The C-24W is primarily designed for both air-to-air and air-to-ground missions, making it a formidable asset in any air force.

One of the main features of the C-24W is its powerful propulsion system, which consists of twin turbofan engines that provide exceptional speed and agility. The aircraft is capable of quick ascents and high-speed maneuvers, enabling it to evade enemy threats while engaging in combat. The engine design also allows for reduced fuel consumption, which translates to a longer operational range and increased mission versatility.

The C-24W boasts a cutting-edge avionics suite, integrating advanced digital fly-by-wire technology, allowing for precise control and enhanced safety. The cockpit is equipped with a state-of-the-art digital display system that provides pilots with real-time data on aircraft systems, terrain mapping, and enemy targets. The integration of artificial intelligence assists in combat decision-making, improving situational awareness and response time.

One of the standout characteristics of the C-24W is its stealth capabilities. The aircraft features a low observable design, which minimizes its radar signature, enabling it to conduct missions deep into enemy territory without being detected. This strategic advantage is further enhanced by its electronic warfare systems, capable of jamming enemy radar and communication systems, ensuring that the aircraft remains undetected while carrying out its objectives.

For armament, the C-24W can carry a diverse range of munitions, including air-to-air missiles, precision-guided bombs, and a variety of other ordinance types. This flexibility allows the aircraft to adapt to different mission requirements, making it effective in both air superiority and ground attack roles.

In terms of survivability, the C-24W is equipped with advanced countermeasure systems that provide protection against enemy missiles and fire. These advanced systems enhance not only the aircraft's longevity but also the success of the missions it undertakes.

Overall, the DCS C-24W is an impressive and sophisticated aircraft that reflects modern technological advancements. Its combination of speed, stealth, advanced avionics, and extensive weaponry makes it a critical component for any air combat strategy, ready to meet the challenges of today’s evolving battlefield.
Top Page Image Contents