Electrical Grounding, Alternate Grounding Method

ELECTRICAL - GROUNDING

ALTERNATE GROUNDING METHOD

If installation of a properly grounded wall receptacle is impossible at the time of installation, consult your local electri- cal inspector for permission to connect a temporary adapter (with polarized blades) which could be plugged into your present 2- wire receptacle; however, this is not recommended. If this is done, you must attach the lug and/or the green adapter wire to the receptacle cover plate screw. Ground from it to a grounded metal cold water pipe* (See Fig.10). Do not ground to a gas supply pipe. You must permanently ground the adapter before connecting the appliance to the power supply.

FIG. 9	TWO PRONG
	RECEPTACLE

COVER
PLATE
GROUND WIRE
	GROUND WIRE
THREE-PRONG
ADAPTER
	GROUNDED WATER PIPE
THREE-PRONG PLUG
777fig13

CAUTION:

Attaching the adapter ground wire to wall receptacle cover screw does not ground the appli- ance unless the cover screw is grounded through house wiring.

If there is any doubt as to whether the wall receptacle is properly grounded, the customer should have it checked by a qualified electri- cian.

*Cold water pipe must have metal continuity the electrical ground and cannot be interrupted by plastic, rubber or other electrically insulating connectors (including water meter or pump) without adding a jumper wire at these con- nections (See Fig.9).

FIG. 10

C-24W specifications

The DCS C-24W is a versatile and highly capable multi-role combat aircraft designed for modern warfare. This aircraft has garnered attention for its advanced features and specifications that cater to contemporary military needs. The C-24W is primarily designed for both air-to-air and air-to-ground missions, making it a formidable asset in any air force.

One of the main features of the C-24W is its powerful propulsion system, which consists of twin turbofan engines that provide exceptional speed and agility. The aircraft is capable of quick ascents and high-speed maneuvers, enabling it to evade enemy threats while engaging in combat. The engine design also allows for reduced fuel consumption, which translates to a longer operational range and increased mission versatility.

The C-24W boasts a cutting-edge avionics suite, integrating advanced digital fly-by-wire technology, allowing for precise control and enhanced safety. The cockpit is equipped with a state-of-the-art digital display system that provides pilots with real-time data on aircraft systems, terrain mapping, and enemy targets. The integration of artificial intelligence assists in combat decision-making, improving situational awareness and response time.

One of the standout characteristics of the C-24W is its stealth capabilities. The aircraft features a low observable design, which minimizes its radar signature, enabling it to conduct missions deep into enemy territory without being detected. This strategic advantage is further enhanced by its electronic warfare systems, capable of jamming enemy radar and communication systems, ensuring that the aircraft remains undetected while carrying out its objectives.

For armament, the C-24W can carry a diverse range of munitions, including air-to-air missiles, precision-guided bombs, and a variety of other ordinance types. This flexibility allows the aircraft to adapt to different mission requirements, making it effective in both air superiority and ground attack roles.

In terms of survivability, the C-24W is equipped with advanced countermeasure systems that provide protection against enemy missiles and fire. These advanced systems enhance not only the aircraft's longevity but also the success of the missions it undertakes.

Overall, the DCS C-24W is an impressive and sophisticated aircraft that reflects modern technological advancements. Its combination of speed, stealth, advanced avionics, and extensive weaponry makes it a critical component for any air combat strategy, ready to meet the challenges of today’s evolving battlefield.