Care and Maintenance, Cleaning the Cooktop

CARE AND MAINTENANCE

CLEANING THE COOKTOP

WARNING:

Be careful cleaning any part of this appliance while hot.

All parts of the appliance can be cleaned with a small amount of hot soapy water, rinsed, dried and buffed to a shine with a soft, heavy pile cloth. Always try this first, as it is the mildest cleaning procedure.

1.Use the mildest cleansers first. Some brands of cleaners are harsher than others and may cause metal parts to discolor or corrode, read their directions. Be sure all the cooktop controls are turned OFF and the appliance is COOL before using any type of aerosol cleaner on or around the appliance. The chemical that produces the spraying action could, in the presence of heat, ignite.

2.To avoid marring the surfaces, always rub metal finishes in the direction of the polish lines. The cleaner will be more effective when used in the direction of the polish lines.

3.Use only clean sponges, soft cloths, paper towels, and plastic non-metal for cleaning or scouring (use only soap pads with soap still in them, an empty pad can scratch), as recommended in this section.

4.Be sure to rinse all parts thoroughly and wipe dry to avoid water marks.

5.If stains remain on the bottom of the cooktop sump, use this easy procedure. Place a paper collar around the burner and igniter, tape it together. This will cover the aluminum under the burner cap and the igniter. Spray the dirty area with Easy Off® or SOS Oven Cleaner® when cool. Cover with paper towel. Leave on for 4 hours or overnight. With a warm wet sponge, wipe clean and polish with a lint free soft towel. You should never use anything stronger than a sponge or a plastic non-metal sponge on your cooktop.

BRAND NAMES:

In this section, the use of name brands is intended only to indicate a type of cleaner. This does not constitute an endorsement. The omission of any name brand cleaner does not imply its adequacy or inadequacy. Many products are regional in distribution and can be found in the local markets and department stores.

CLEANING THE BURNER GRATES:

Turn off all the burners and allow the grates to cool before starting to clean the cooktop. Rapid cooling of the grates, for instance, placing hot grates in cool or tepid water to clean, can thermally shock the porcelain coating and cause cracking or chipping. If you wipe off any part of the cooktop while it is hot, do so carefully as using a wet sponge or cloth can result in steam burns.

Once the grates are cool they may be wiped clean while on the cooktop using hot soapy water, then rinsed and wiped dry or they may be placed in the dishwasher for easy cleaning. The occasional use of mild abrasive cleansers such as Bon-Ami®, Soft Scrub® or a soap-filled plastic or non-metal pad is okay. Abrasive cleansers, used vigorously or too often, can eventually harm the enamel. Apply with a damp sponge, rinse thoroughly and dry.

CTD-304, CTD-365 specifications

The DCS CTD-365 and CTD-304 are advanced temperature and conductivity sensors that are designed for underwater and marine applications. These instruments are widely recognized for their precision, reliability, and ability to operate in challenging environments. They are essential tools for researchers, marine biologists, and environmental scientists who require accurate data for their studies.

The CTD-365 is equipped with a robust suite of features that allow for high-resolution measurements of temperature and conductivity. It features a compact design that facilitates easy integration into various underwater sensing platforms, including buoys, ROVs, and autonomous underwater vehicles (AUVs). This model is characterized by its wide operational depth range, allowing it to function effectively across various marine environments, from shallow coastal waters to deep oceanic trenches.

One of the core technologies in the CTD-365 is its advanced thermistor and conductivity cell design, which ensures quick response times and high accuracy in measuring physical parameters. The sensor's digital output provides real-time data, making it suitable for dynamic monitoring applications. The instrument supports a variety of communication protocols, facilitating seamless integration into existing data collection systems.

On the other hand, the CTD-304 is designed with portability in mind, making it an ideal choice for field research where space and weight are constraints. Despite its compact design, the CTD-304 does not compromise on performance. It delivers precise measurements of temperature and conductivity with a focus on ease of use and quick deployment. This model is particularly appealing to users who require a simple yet effective tool for data gathering.

Both the CTD-365 and CTD-304 are built to withstand harsh environmental conditions, with materials that resist corrosion and degradation. This durability ensures long-term functionality, reducing the need for frequent maintenance or replacements. Additionally, these sensors come with user-friendly interfaces and data logging capabilities, allowing researchers to store and retrieve data effortlessly.

In conclusion, the DCS CTD-365 and CTD-304 models exemplify advancements in underwater measurement technology. With their blend of accuracy, durability, and ease of operation, they serve as essential instruments in marine research, contributing to a deeper understanding of oceanographic conditions and ecological health. As marine exploration continues to grow in importance, these sensors play a critical role in supporting sustainable practices and environmental conservation efforts.