Aiwa CSD-FD82, CSD-FD92 operating instructions Specifications, Copyright

Page 3

the outlet. To avoid defeating the safety feature of the polarized plug, do not force it into a power outlet.

3AC power cord

-When disconnecting the AC power cord, pull it out by the AC power plug. Do not pull the cord itself.

-Never handle the AC power plug with wet hands, as this could result in fire or shock.

-Power cords should be firmly secured to avoid being bent, pinched, or walked upon. Pay particular attention to the cord from the unit to the power socket.

-Avoid overloading AC outlets and extension cords beyond their capacity, as this could result in fire or shock.

4Extension cord - To help prevent electric shock, do not use a polarized AC power plug with an extension cord, receptacle, or other outlet unless the polarized plug can be completely inserted to prevent exposure of the blades of the plug.

5When not in use - Unplug the AC power cord from the AC outlet or remove all the batteries if the unit will not be used for several months or more. When the cord is plugged in, a small amount of current continues to flow to the unit, even when the power is turned off.

Maintenance

Clean the unit only as recommended in the Operating Instructions.

Damage Requiring Service

Have the units serviced by a qualified service technician if:

-The AC power cord or plug has been damaged

-Foreign objects or liquid have got inside the unit

-The unit has been exposed to rain or water

-The unit does not seem to operate normally

-The unit exhibits a marked change in performance

-The unit has been dropped, or the cabinet has been damaged

DO NOT ATTEMPT TO SERVICE THE UNIT YOURSELF.

Specifications

Tuner section

Frequency range, antenna — FM: 87.5 - 108.0 MHz

Rod antenna, AM: 530/531 - 1,710/1,602 kHz (10/9 kHz step) Ferrite bar antenna

Deck section

Track format — 4 tracks, 2 channels / Frequency range

Normal tape: 50 - 12,500 Hz (EIAJ) / Recording system — AC bias / Erasing system — AC erase / Heads — Recording/playback head (1), Erasure head

(1)

CD player section

Disc — Compact disc / Scanning method — Non- contact optical scanner (semiconductor laser)

General

Speaker — 100 mm cone type (2), 36 mm cone type (2)

/Output — Headphones jack (stereo mini-jack) / Power output — 2.5 W + 2.5 W (EIAJ, 7 ohms DC) / Power requirements — DC 12 V using eight size C (R14)

batteries, AC 120 V, 60 Hz / Power consumption — 15 W / Dimensions (W × H × D) — 460 × 192 × 262 mm (18 1/8 × 7 5/8 × 10 3/8 in.) / Weight (excluding batteries)

— 4.0 kg (8 lbs. 13 oz.) / Accessories — Remote control (1), AC cord (1)

Specifications and external appearance are subject to change without notice.

COPYRIGHT

Please check the copyright laws relating to recordings from disc, radio or external tape for the country in which the machine is being used.

If an erroneous display or malfunction occurs

Turn off the unit and press POWER STANDBY/ON6 while pressing s.

If the unit cannot be reset in the way above, disconnect the AC cord and remove all the batteries to turn off the display.

Leave the unit for a while and turn the power back on.

ENGLISH 3

En

Image 3
Contents CSD-FD92 CSD-FD82 Electric Power PrecautionsExplanation of Graphical Symbols InstallationCopyright SpecificationsChanging the display color Power supplyConnect the AC cord as illustrated below Demo displayMaintenance Remote controlREPEAT/MODE/SLEEP Press r, t Tuning -, + to select a stationTuner Operation Press *TUNER/BAND repeatedly to select the desired bandSound Adjustment Presetting StationsPress dPLAY/DIR/PRESET cPLAY Preset to start play CD OperationPress CD Repeat to program other tracks Press dc to start play REPEAT, Random PlayProgrammed Play Stop mode, press *REPEAT/MODETape Operation PlaybackRecording Setting the Sleep Timer