Aiwa AV-S17 manual Select the function to be adjusted, Press the N UP or M Down button repeatedly

Page 12

About the video source to the monitor or TV

Selected Video source

V1: VIDEO 1, V2: VIDEO 2, V3: VIDEO 3

The selected video source is indicated on the display and the video signal through the MONITOR VIDEO OUT jack is output on the TV.

To select the video source

1Turn the FUNCTION to select PHONO, CD or AUX.

2Press the ENTER button to display VIDEO 1.

3Turn the MULTI JOG to select VIDEO 2 or VIDEO 3.

To change a displayed name for the VIDEO 1 and VIDEO 2

When the VIDEO 1 function is selected, VIDEO 1 is displayed initially. It can be changed to DVD or MD.

Press the BAND button while pressing the ENTER button, then release the ENTER button first.

The displayed name for the VIDEO 2 function can be changed to VIDEO 2, LD or TV; while the VIDEO 2 function is selected, press the BAND button while pressing the ENTER button, then release the ENTER button first.

To adjust the sound level of the connected source

The input sensitivity level of each function can be adjusted (except the TUNER and TAPE MONITOR).

When the sound level of the connected source is higher or lower than that of the TUNER, adjust it as follows.

1 Select the function to be adjusted.

Turn the FUNCTION and play the source.

2 Press the N (UP) or M (DOWN) button repeatedly.

The level can be adjusted between -6dB (MIN) and +8dB (MAX) in 2dB steps. Adjust the level so that the sound is output at the same level as the TUNER.

NOTE

The input sensitivity level of the TAPE MONITOR cannot be adjusted. Even if TAPE MONITOR is selected, pressing the N orM button will change the level of the selected function (except TUNER) displayed on the window.

RECORDING AN AUDIO SOURCE

BASIC OPERATIONS

SOUND

1 Select the program source to be recorded.

Turn the FUNCTION.

2Set the tape deck or MD recorder to the recording mode.

3Start the selected program source.

To monitor recorded sound during recording (when the connected tape deck is a three-head system)

Press the TAPE MONITOR button. “TAPE ON” appears on the display for four seconds, and then the source name selected in step 1 comes back on. To cancel the tape monitor, press it again so that “TAPE OFF” appears.

NOTE

•Any sound control system has no effect on recording (see page 8).

•When recording audio sources by the MD recorder connected

to the VIDEO 1/DVD/MD AUDIO OUT terminals, the selected En video source (see left column) should be V2 or V3. Recording cannot be done while the V1 (VIDEO 1) is selected and displayed on the window.

•Input sound from the tape deck connected to the TAPE MONITOR IN terminals cannot be recorded.

ENGLISH 10

Page 11 Page 13
Image 12
Page 11 Page 13
Contents AV-S17 Page Precautions InstallationElectric Power AC power cordTable of Contents Connecting Equipment Before connecting the AC cordConnections Connecting SPEAKERS1 Connecting + to +, to terminalsSpeaker terminals Speaker impedanceConnecting the Supplied Antennas Connecting AN Outdoor AntennaAbout the Remote Control Setting the Clock Press the Enter buttonPower Economizing ECO Mode Press the Power buttonBefore Operation Custom Audio Adjustment Volume ControlSound Adjustment During Recording Super T-BASS SystemStart the selected program source Adjust the sound Electronic Graphic EqualizerSelection of AUDIO/VIDEO Source Select the program sourceSelect the function to be adjusted Press the N UP or M Down button repeatedlySelect the program source to be recorded To select the video sourceManual Tuning Press the N or M button to select a stationPresetting Stations Preset Number TuningRepeat steps 1 Specifications FM tuner sectionAM tuner section Amplifier sectionCare and Maintenance Troubleshooting GuideParts Index GeneralSignification des symboles graphiques AvertissementElectricité Relevé du propriétaireVé rifiez vos accessoires Table DES MatieresAntenne exté rieure EntretienRaccordements Raccordement DE Tout ’EQUIPEMENTAvant de raccorder le cordon secteur CamescopeRaccordement DES Enceintes Bornes d’enceinteImpé dance des enceintes Raccordement des bornes + à + et àPropos DE LA Telecommande Raccordement DES Antennes FourniesRaccordement D’UN Antenne Exterieure Reglage DE L’HORLOGE Appuyez sur la touche EnterMode D’ECONOMIE D’ENERGIE ECO Avant DE CommencerSé lection de la paire d’enceintes avant Reglage DE Volume Reglage DE LA TonaliteSysteme Super T-BASS Reglage DU SON Pendant ’ENREGISTREMENTPour annuler le mode sé lectionné Pour sé lectionner le mode avec la té lé commandeSé lectionner avec la té lé commande Egaliseur Graphique ElectroniqueEnregistrement D’UNE Source Audiobase Sé lectionnez la fonction dont le niveau doit ê tre ajustéAppuyez de faç on ré pé té e sur la touche NUP ou M Down Pour sé lectionner la source vidé oAccord Manuel Appuyez sur N ou M pour sé lectionner une stationPrereglage DES Stations Reglage DE LA Minuterie D’ARRETAccord DES Stations Prereglees Refaites les opé rations 1 etSection Tuner FM Section Tuner AMSection Amplificateur Gé né ralité sSoin ET Entretien EN CAS DE PanneNomenclature Section Tuner

AV-S17 specifications

The Aiwa AV-S17 is a compact and dynamic audio amplifier that reflects the brand's dedication to delivering quality sound in a versatile package. Known for its exceptional performance, the AV-S17 has become a popular choice among audiophiles and casual listeners alike.

One of the key features of the Aiwa AV-S17 is its impressive power output, typically rated at around 40 watts per channel. This level of power ensures that it can drive a variety of speakers with ease, providing clear and robust sound across different frequencies. The amplifier is designed to minimize distortion, which means that users can enjoy their music at higher volumes without compromising on audio quality.

In terms of connectivity, the Aiwa AV-S17 comes equipped with multiple input options, including RCA inputs for connecting a CD player, turntable, or other audio sources. Additionally, it has speaker terminals that allow for flexible speaker configurations. The straightforward layout makes it easy to connect and switch between devices, making it an ideal choice for home audio setups.

The AV-S17 embraces analog technology, which is well-regarded for its warm and rich sound signature. This amplifier is particularly appealing to those who appreciate classic audio setups. It also features tone control options, allowing users to customize the bass and treble levels to their preference, enhancing the listening experience further.

Another notable characteristic of the Aiwa AV-S17 is its compact form factor. Unlike many bulky amplifiers, this model is designed to fit comfortably into smaller spaces, making it suitable for a wide range of environments, from cozy apartments to dedicated audio rooms.

The build quality of the AV-S17 aligns with Aiwa's reputation for durability. The chassis is robust, ensuring that it can withstand the rigors of regular use while also providing a stylish aesthetic that complements a variety of home decors.

Overall, the Aiwa AV-S17 stands out for its power, connectivity, and user-friendly features, making it a reliable choice for anyone looking to enhance their audio experience without breaking the bank. Whether you are a seasoned audiophile or a casual music lover, the AV-S17 is sure to deliver enjoyment and satisfaction in every listening session.
Top Page Image Contents