Savin 3360DNP operating instructions Adjusting the Image Density of Prints, Before Making a Master

Adjusting the Image Density of Prints

Adjusting the Image Density of Prints

There are two ways to adjust the im- age density of prints:

❖Before making a master

Use the {Image Density} key.

❖After making a master

Use the {W}{V} (Speed) keys.

Before Making a Master

A Press the {Image Density} key to ad- just the image density.

	Stamp	Image Density
		Lighter	On Line
		Normal
		Darker 1
	Make-Up	Darker 2	Auto On Line
	Over lay	Economy Mode
Skip Feed	Edge Erase	Original Storage	Job Separator

ZDZS010N

B Press the {Start} key.

After Making a Master
	1

A To increase the image density, press the {W} key. To reduce the image density, press the {V} key.

Note

❒The faster the printing speed be- comes, the lighter the printing density is. If you want darker prints, decrease the printing speed.

25