Savin 3360DNP operating instructions Skip Feed Printing, Press the OK key Press the Start key

Operation

Skip Feed Printing

You can increase the time between

1 prints using the {Skip Feed}key. By de- fault, when one sheet of paper is fed, the drum rotates twice. However, you can select the number of drum rota- tions. This gives you a chance to re- move prints one by one from the paper delivery tray or insert one sheet of paper between two prints. If you use this function, you can also use pa- per longer than the length limitation of 432mm, 17.0".

Note

❒For every sheet of paper fed, the drum rotates twice by default. You can change this default setting with the user tools. See “No. of Skip Feed” on p.144 “4. Mode Set- ting”.

❒The maximum length of paper in Skip Feed mode is 460mm, 18.1".

❒When you use paper longer than 432mm, 17.0", prints will not be de- livered to the paper delivery tray properly, so lower the paper deliv- ery end plate and take out the prints by hand.

A Place your original on the expo- sure glass or in the optional docu- ment feeder.

B Press the {Skip Feed} key.

Stamp	Image Density
	Lighter	On Line
	Normal
	Darker 1
Make-Up	Darker 2	Auto On Line

C If necessary select the number of drum rotations per sheet of paper fed with the [←] [→] or {~} {}} keys.

Note

❒You can also select the number of rotations with the number keys.

❒You can select from 2 to 9 rota- tions.

❒By default, the machine asks you to confirm the number of rotations. You can have this step omitted by adjusting the user tool settings. See “No. of Skip Feed” on p.144 “4. Mode Set- ting”.

D Press the [OK] key.

E Press the {Start} key.

Over lay

Economy Mode

Skip Feed Edge Erase Original Storage Job Separator

ZDZS030N

70