Savin 3360DNP operating instructions Auto Class Mode

Operation

	Auto Class Mode
1	Preparation
	You have to store the number of

students in each class with the user tools. See p.154 “3-5 Class Enter No.”.

Use the {Class} key to make sets of prints from the same original. The stored numbers of prints are made for each set.

This feature is useful for teachers who frequently make multiple print sets for their classes, e.g. notes, handouts, tests etc.

Using a standard print function, the teacher would have to stand by the machine entering the number of prints and pressing the {Print} key for each class. However, Auto Class mode allows you to store the number of students in each class into the ma- chine memory beforehand with the user tools. Then, whenever you need to make print sets for several classes, place your original, select the classes that need prints and press the {Start} key. Print sets will be made contain- ing the correct number of prints for each class.

GRCLAS2E

Note

❒When you set Auto Class mode, Job Separation mode is automati- cally turned on. The job separator pulls the top sheet of the each set delivered to the paper delivery tray to mark the end of each printed set. The next cycle begins automatical- ly. See p.77 “Job Separation”.

❒You can cancel Job Separation mode in Auto Class mode with the user tools. See “Auto Separate” on p.144 “4. Mode Setting”.

A Press the {Class} key.

B Select[By-class]with the[→] or{}} key.

C Press the [OK] key.

54