Savin 3360DNP operating instructions Directional Magnification Size

Directional Magnification (Size)

F Enter the vertical original size with the number keys and press the {q} key.

Note

❒To change the value entered, press the {Clear/Stop}key and en- ter the new value.

❒Up to 999mm, 99.9" can be en- tered.

G Enter the vertical print size with the number keys, and then press the {q} key.

H Enter the horizontal original size with the number keys, and then press the {q} key.

I Enter the horizontal print size with the number keys.

J Press the [OK] key.

M Press the {Start} key.

1

N Check the image position on the trial or proof print.

Note

❒If the image position is not cor- rect, adjust it using the [Image =] key. See p.24 “Adjusting the Po- sition of Printed Images”.

O Make your prints.

The machine will select appropri- ate reproduction ratios for the ver- tical and horizontal directions.

K Make sure that the original and the print paper are the correct size.

L Place your original on the expo- sure glass or in the optional docu- ment feeder.

39