When the master is wrapped around the drum, 173

x Clearing Misfeeds

E If you cannot remove the misfed paper, remove it from the paper feed tray.

F Set the drum unit and close the front door.

Note

❒For setting the drum unit, see p.130 “Changing the Color Drum Unit”.

-To prevent paper misfeeds:

See p.171 “”x + A” Paper Misfeeds in the Paper Feed Section”.

C Take out the drum.

B 2

B 3

B 2

Note

❒For taking out the drum unit,

see p.130 “Changing the Color	5
Drum Unit”.

D While pressing the drum lock, grasp the edge of the master (the white area) and peel it off.

”x + B” Paper or Master Wrapped Around the Drum

When the master is wrapped around the drum

A Open the front door.

B Lower drum unit lock lever (B1).

E Return the drum lock to its origi- nal position.

F Set the drum unit and close the front door.

Note

❒For setting the drum unit, see p.130 “Changing the Color Drum Unit”.

When paper is wrapped around the drum

A Open the front cover.

173

Page 193

Image 193

Savin 3360DNP When the master is wrapped around the drum, When paper is wrapped around the drum, 173, Open the front cover

Contents

Operating Instructions Introduction Means Power ON. b means Power OFF Introduction Safety During Operation Safety InformationPage Symbols How to Read This ManualIii Placing originals on the exposure glass Making PrintsInserting originals in the optional document feeder Page What You Can do with this Machine All Class Mode Economy ModeAuto Class Mode Manual Class Mode Auto Combine Mode Class ModeSecurity Mode Quality Start Mode Image Rotation Printing in Two Colors Date StampMake-up Printing Merging Images Original Storage Memory CombineStorage Overlay See p.115 Memory Combine Table of Contents Image Rotation Make-up Printing Features Security Mode Quality Start ModeCommand Sheets for Make-Up Printing Printing onto Various Kinds of Paper Combination Chart 135 Color Printing Using the Optional Color Drum 130Make-up Printing Make-up Samples Original Storage 100 Image Overlay 105 User Tool Menus in Detail 153 Accessing the User Tools 139 User Tools Menu 141Loading Paper 170 Clearing Misfeeds 171 Xiv Poor Printing 189 Dos and Donts 193 Where to Put Your Machine 195Maintaining Your Machine 197 206 Xvi Front door Paper feed tray down key Machine ExteriorFlip up cover Paper feed side plates Operation panel Paper feed tray Machine Interior Drum unit lock lever B1 Ink holderDrum unit Exposure glass Exposure glass cover OptionsDocument feeder Exposure glass cover Twin color press roller printing system TC-II Keys Operation Panel Number keys V keys Speed keys Indicators Prev.Next Panel Display Available functions Confirms the settings Sample display when selecting the Original keyPanel Display Layout Print Paper Operation Operation Originals = 8mm Loading Paper Printing PreparationsCarefully open the paper feed tray When you use 81.4 g/m2, 21.6 lb or thicker paper Setting Up The Paper Delivery TrayLower the paper alignment wings Lift the paper alignment wings Turn on the main switch When you use A4, 8 1/2 ⋅ 11KL paperSwing out the guides as shown Illustration Enter your 4-digit user code with the number keys Entering a User Code to Use the MachinePress the q key Make your prints Standard Printing Make sure that there are no previ- ous settings remainingLift the exposure glass cover Removing Prints Standard Printing Energy Saver Mode Auto Reset Adjust image position using the ~, , , and keys Adjusting the Position of Printed ImagesPress the Image = key Before Making a Master Adjusting the Image Density of PrintsBefore making a master After making a master Tint Mode Changing the Printing Speed Stopping a Multi-print Run to Print Another Original Stopping a Multi-print Run Metric version Reducing and Enlarging Using Preset RatiosInch version Operation Auto Magnification 129% 129% *1 81/2 ⋅ Make your prints Adjust the ratio with the ← → or ~ keys Using the ← → or ~ keysZoom Press the Ratio key Select Mag. with the → or key Using the number keys Directional Magnification % Adjusting ratios with the ← → or ~ keys Entering ratios with the number keys Select Mag. with the → or key Press the OK key Directional Magnification Size→ or key Press the OK key Directional Magnification Size Erasing Center and Edge Margins When not using Edge Erase mode Using Edge Erase modeEdge Erase Press the Edge Erase key Key. See p.24 Adjusting the Po- sition of Printed Images Printing onto Thick Paper Printing onto Various Kinds of PaperPress the Ppr.Type key Printing onto Special Kinds of Paper Printing onto Envelopes To prevent paper misfeeds Selecting Original Modes Letter/Photo Mode Printing Adjusting the photo mode contrast Photo Mode PrintingAdjust the contrast with the ← → or ~ keys Adjust the contrast with Pencil Mode Printing← → or ~ keys Press the OK key Select the dot pattern with the ← → or ~ keys Make your prints Press the Economy Mode key Economy Mode Auto Cycle All Class Mode All Class Mode Auto Class Mode Selecting classes with the number keys Selecting classes with the ~, , , or key Make your prints Select Manual with the → or Key.1 Manual Class Mode with One Original Operation Press the Class key Manual Class Mode with two or More Originals Repeat step N until you have finished printing Select Same-NO.with the → or Class Mode Up to 99 sets can be selected for an original Single-sided originals → 1 single-sided print with 2 images Combine OriginalsSingle-sided originals → 1 single-sided print with 4 images A4K B5K A5K B6K A6K Place the first original face down Enter the number of prints using the number keys Press the Combine key Check the print paper size and the reproduction ratioPress the OK key Press the Start key ZDCH110E Single-sided original → 1 single-sid- ed print of 2 images Auto Combine ModeSingle-sided originals → 1 single- sided print of 4 images ← → or ~ keys Auto Combine Mode Skip Feed Printing Skip Feed Printing Storing a Program Programs Press the Select key Press the OK key Protecting a Program Ment feeder Recalling a Program Make your prints Press the Security key Security ModePress the Yes key Using Quality Start Manually Quality Start ModeManual Quality Start Auto Quality Start Job Separation Press the Job Separator key Conserving the Master Press the On Line key Press the fin Prnt key On Line PrintingPress the Pnt.Size key Refer to the PC controller man- ual Press the Auto On Line key Auto On Line Image Rotation Main Features Make-up Printing FeaturesMake-up Modes for Designated Areas Mode Positive Neg Ative mode Make-up Modes for Outside Designated Areas Mode Sample Undesignated Area Command sheet/Original Print Background Patterns Command Sheets Command Sheets for Make-Up PrintingMaking a Command Sheet Features Designated area Area recognized Preferred designated area Diagonal line method Put the command sheet on top of the original C = 2mm Closed area method Drawing a command sheet using a diagonal line Command Sheets and Finished Prints Fruit Drawing a command sheet using a closed line Press the Make-Upkey Make-up Printing Make-up Printing Operation Make-up Samples Original Print Command sheet No.1Sample Command sheet No.2 Print Original Command sheet No.1 ZM-52 Storing Originals Original Storage100 101 Non-standard size originals Protecting Originals Protecting Stored Originals102 Removing Original Protection Deleting Stored Originals103 Select the Yes or No key 104 Storage Overlay Image OverlayOverlay Format Overlay Format On Line Overlay106 Press the On Line key 107 Placing originals in the optional document feederPlace the first original on the exposure glass Place originals Docu Ment feeder 108 Date StampPress the Stamp key Placing your originals K in the optional document feeder Placing your original K on Exposure glass109 110 Stamp If you selected 1/5,2/5 If you selected P1,P2 or -1-,-2111 Enter the first page number withthe←→or~keys 112 Placing your originals K on the exposure glassPlace the first original as Shown in the illustration Select Stamp with the ← → or 113 114 Placing your original K on the exposure glass contact glassPlace your original and press Set your original as shown in the illustration Combining onto a Single-sided Print Memory Combine 116 117 Placing originals on the exposure glass metric version 118 Placing originals on the exposure glass inch version 119 Placing your original K on the exposure glassPlace your originals 120 RepeatPress the q key after all the originals have been scanned Example copying 81/2 ⋅ 11 Koriginals onto 11 ⋅ 17 Lpaper Example copying A4 Loriginals onto A3Lpaper121 Set your original 122 123 124 Originals Optional Document Feeder125 126 Placing Originals 127 Combine PrintingInsert the two originals face up 128 Manual Class Mode with Two or More Originals Press the Auto Cycle key 129 Making Color Prints Color Printing Using the Optional Color DrumChanging the Color Drum Unit 130 Make sure the optional color drum lock is securely set 131 132 Printing in Two ColorsLift drum unit lock lever B1 133 Printing Area At 23C/73F, 65% RH Changing the Drum SizeMaster Cut Length 134 135 Combination Chart 136 137 138 Using the ~, , , or key Accessing the User Tools139 Press the User Tools key To the standby display 140 System User Tools Menu141 142 Set Operatn Mode 143 Initial Setting 144 Mode Setting 145 Default Not to use 146 Default Not to cancel 147 148 Stamp 149 Default Upper Left User Codes Administrator Mode150 151 On Line Mode 152 User Tool Menus in Detail Time Setting153 Press the OK key Enter the year with the number keys Class Enter No Reproduction Ratio154 Press the OK key twice 155 Margin Erase AreaSelect the grade with the ← → or ~ keys Press the OK key If you selected A3 to A6 or 11 ⋅ 17 to 51/2 ⋅ 81/2 11 No. of Skip FeedIf you selected p 156 157 14 No. of Q.start Type of Paper Select the temperature at which158 You use this machine with the ← 159 Stamp Position 160 Position Date P1 or 1/5 Position161 162 163 Make/Chg. PatternPress theqor Clear/Stopkey to edit the pattern Check Counter Reset Counters164 Enter 6 with the number keys, and then press the OK orqkey If you selected Single Chg. User CodeIf you selected All 165 166 Del. User Code 167 If Your Machine Does Not Operate as You Want 168 When a service call message is shown on the panel display If You Cannot Make Prints as You Want Combine Originals Mode169 170 Loading Paper + a Paper Misfeeds in the Paper Feed Section Clearing Misfeeds171 Remove the misfed paper Gently pull out the misfed paper from the inside 172 When paper is wrapped around the drum When the master is wrapped around the drum173 Open the front cover Lower drum unit lock lever B1 Take out the drum When paper is misfed inside the machine 175 + C Paper Misfeeds in the Paper Exit SectionSlowly, but firmly pull out the misfed paper Open the front door Lower drum unit look lever B1 176 177 + B + E Master Misfeeds in the Master Eject Section Pull out lever E3 and remove the misfed master 178 179 If master misfeeds occur oftenOpen the document feeder ADF cover Pull out the misfed original gen- tly 180 To prevent originals misfeeding Front door When the Open Cover/Unit Indicator M LightsOptional document feeder ADF cov- er 181 182 When the Add Ink Indicator j LightsOpen the front door Pull out the ink holder 183 184 When the Master End Indicator C Lights 185 186 When the Master Eject Indicator k Lights 187 When Other Indicators Are Lit When Printing on Small Size Paper When Prints Are Not Delivered in a Neat Stack188 Poor Printing Turn off the main switchDirty Background 189 Pull out the drum unit 190 191 Close the front door Turn on the main switch Faint Prints Black Lines/Stained Prints192 193 Dos and Donts 194 Environment Where to Put Your MachineOptimum environmental conditions Environments to avoid Machine Clearance Power ConnectionMain frame 196 Maintaining Your Machine Cleaning the Main Frame Cleaning the Sheet Cleaning the Optional Document Feeder198 Main Frame Printing Area Print Paper WeightPrint Paper Size Leading Edge Margin Weight Dimensions W ⋅ D ⋅ HPower Consumption Master Eject Unit Capacity 202 Optional Equipment Document Feeder Option Original WeightOriginal Capacity 203 Twin Color Press Roller Printing System TC-II Option 205 Consumables 206 Index Edge Erase key 207 On Line key 208 User Tools key 209 210 211 212 Operating Instructions