Savin 3360DNP operating instructions 194

	Remarks
	• If the printed paper is stored for more than one day, the paper may become
	wrinkled. If this paper is used, wrinkles may also appear on the master. If the
	paper will be stored for more than one day, store it in its original wrapping
	paper or other protective covering.
	• Shadowing may occur if the printed image at the rear edge of the paper is a
	solid color, when the printing speed is set to 1. If this occurs, print the image
	with the printing speed set to 3.
	• If there are fine lines within 5mm to 10mm, 0.2" to 0.4" of the edge of the im-
	age, shadowing may occur.
	• Depending on the type of paper being used, speckles may appear within
	5mm to 10mm, 0.2" to 0.4" of the edge of the image at around 1000 prints.
	• When two or more sheets of paper feed at once, set paper on the paper feed
	side plates securely. See p.15 “Printing Preparations”.
	• When paper misfeeds occur, select the proper paper type from [Ppr.Type]. See
	p.43 “Printing onto Various Kinds of Paper”. If the problem persists, fan or
	turn the paper over.
	• If the paper skews, make sure to set the paper feed side plates securely. See
	p.15 “Printing Preparations”.
	• Make sure originals on the exposure glass are correctly positioned and
6
	aligned with the scale.

• If the edges of the paper are rounded, skewing might occur. Change the pa- per's orientation or replace.

• If the paper becomes creased, make sure the correct paper type has been se- lected [Ppr.Type]. See p.43 “Printing onto Various Kinds of Paper”.

• If non-standard papers crease frequently, use the standard paper type.

194