Savin 3360DNP When Prints Are Not Delivered in a Neat Stack, When Printing on Small Size Paper

Troubleshooting

When Prints Are Not Delivered in a Neat Stack

When Printing on Small Size Paper

A Adjust the angle of the end plate by turning the screw clockwise or counterclockwise.

5

Note

❒Make sure that the paper size and direction in the panel dis- play match the actual paper size and direction of the paper on the feed tray.

❒If the paper on the paper feed tray has a solid image on its back side, the machine may not be able to detect the size correct- ly. Place a sheet of paper of the same size without an image on the back at the bottom of the pa- per stack.

When the Machine Cannot Detect the Paper Size

If the paper size is not detected cor- rectly when printing, prints might not be delivered in a neat stack. To solve this, do one of the following:

A Re-adjust the paper feed side plates so that there is no space be- tween the side plates and the pa- per, and then lock the side plates in position.

188