152 | Savin 3360DNP specification

4

User Tools

No.	Mode	Description

5	IP Address	Sets the IP Address.

Note

❒Default: 011.022.033.044

		Reference
		See the Printer Reference 1 for information about the IP Ad-
		dress setting.

6	Ethernet Speed	Sets the Ethernet communication speed.

		Note
		❒ Default: Auto
7	Network	Sets the Network boot.

Note

❒Default: NONE

		Reference
		See the Printer Reference 1 for information about the Net-
		work boot setting.

8	I/O Timeout	Sets the time to enable the interface after data stops being re-
		ceived. When the time set here is exceeded, it will be possible to
		receive data from the other interface.

Important

❒If the set time is too short, a time out might occur while one data is being received. As a result, data from another inter- face might cut in and be printed, or the emulation retrieval from half of the data may be activated, and be replaced with a different emulation.

Note

❒Default: 30 sec.

9

I/O Buffer

Sets the capacity of the reception buffer.

		Note
		❒ Default: 512KB

10	Menu Reset	You can reset the factory settings. However, the “IP Address”,
		“Network”, and the “Ethernet Speed” settings do not change.

152

Image 172

Savin 3360DNP operating instructions 152

Contents

Operating Instructions Introduction Means Power ON. b means Power OFF Introduction Safety Information Safety During OperationPage Symbols How to Read This ManualIii Placing originals on the exposure glass Making PrintsInserting originals in the optional document feeder Page What You Can do with this Machine Economy Mode All Class ModeAuto Class Mode Manual Class Mode Class Mode Auto Combine ModeSecurity Mode Quality Start Mode Printing in Two Colors Date Stamp Image RotationMake-up Printing Merging Images Memory Combine Original StorageStorage Overlay See p.115 Memory Combine Table of Contents Security Mode Quality Start Mode Image Rotation Make-up Printing FeaturesCommand Sheets for Make-Up Printing Printing onto Various Kinds of Paper Color Printing Using the Optional Color Drum 130 Combination Chart 135Make-up Printing Make-up Samples Original Storage 100 Image Overlay 105 Accessing the User Tools 139 User Tools Menu 141 User Tool Menus in Detail 153Loading Paper 170 Clearing Misfeeds 171 Xiv Dos and Donts 193 Where to Put Your Machine 195 Poor Printing 189Maintaining Your Machine 197 206 Xvi Machine Exterior Front door Paper feed tray down keyFlip up cover Paper feed side plates Operation panel Paper feed tray Machine Interior Ink holder Drum unit lock lever B1Drum unit Exposure glass Options Exposure glass coverDocument feeder Exposure glass cover Twin color press roller printing system TC-II Operation Panel Keys V keys Speed keys Number keys Indicators Panel Display Prev.Next Available functions Confirms the settings Sample display when selecting the Original keyPanel Display Layout Operation Print Paper Operation Originals = 8mm Loading Paper Printing PreparationsCarefully open the paper feed tray Setting Up The Paper Delivery Tray When you use 81.4 g/m2, 21.6 lb or thicker paperLower the paper alignment wings Lift the paper alignment wings Turn on the main switch When you use A4, 8 1/2 ⋅ 11KL paperSwing out the guides as shown Illustration Enter your 4-digit user code with the number keys Entering a User Code to Use the MachinePress the q key Make your prints Standard Printing Make sure that there are no previ- ous settings remainingLift the exposure glass cover Removing Prints Standard Printing Energy Saver Mode Auto Reset Adjust image position using the ~, , , and keys Adjusting the Position of Printed ImagesPress the Image = key Adjusting the Image Density of Prints Before Making a MasterBefore making a master After making a master Tint Mode Changing the Printing Speed Stopping a Multi-print Run Stopping a Multi-print Run to Print Another Original Metric version Reducing and Enlarging Using Preset RatiosInch version Operation Auto Magnification 129% 129% *1 81/2 ⋅ Make your prints Using the ← → or ~ keys Adjust the ratio with the ← → or ~ keysZoom Press the Ratio key Select Mag. with the → or key Using the number keys Adjusting ratios with the ← → or ~ keys Directional Magnification % Entering ratios with the number keys Select Mag. with the → or key Press the OK key Directional Magnification Size→ or key Press the OK key Directional Magnification Size Erasing Center and Edge Margins Using Edge Erase mode When not using Edge Erase modeEdge Erase Press the Edge Erase key Key. See p.24 Adjusting the Po- sition of Printed Images Printing onto Thick Paper Printing onto Various Kinds of PaperPress the Ppr.Type key Printing onto Envelopes Printing onto Special Kinds of Paper To prevent paper misfeeds Letter/Photo Mode Printing Selecting Original Modes Adjusting the photo mode contrast Photo Mode PrintingAdjust the contrast with the ← → or ~ keys Pencil Mode Printing Adjust the contrast with← → or ~ keys Press the OK key Select the dot pattern with the ← → or ~ keys Make your prints Economy Mode Press the Economy Mode key Auto Cycle All Class Mode All Class Mode Auto Class Mode Selecting classes with the ~, , , or key Selecting classes with the number keys Make your prints Manual Class Mode with One Original Select Manual with the → or Key.1 Operation Manual Class Mode with two or More Originals Press the Class key Repeat step N until you have finished printing Class Mode Select Same-NO.with the → or Up to 99 sets can be selected for an original Single-sided originals → 1 single-sided print with 2 images Combine OriginalsSingle-sided originals → 1 single-sided print with 4 images A4K B5K A5K B6K A6K Enter the number of prints using the number keys Place the first original face down Press the Combine key Check the print paper size and the reproduction ratioPress the OK key Press the Start key ZDCH110E Auto Combine Mode Single-sided original → 1 single-sid- ed print of 2 imagesSingle-sided originals → 1 single- sided print of 4 images ← → or ~ keys Auto Combine Mode Skip Feed Printing Skip Feed Printing Programs Storing a Program Protecting a Program Press the Select key Press the OK key Recalling a Program Ment feeder Make your prints Press the Security key Security ModePress the Yes key Quality Start Mode Using Quality Start ManuallyManual Quality Start Auto Quality Start Job Separation Press the Job Separator key Conserving the Master On Line Printing Press the On Line key Press the fin Prnt keyPress the Pnt.Size key Refer to the PC controller man- ual Auto On Line Press the Auto On Line key Image Rotation Main Features Make-up Printing FeaturesMake-up Modes for Designated Areas Mode Positive Neg Ative mode Mode Sample Undesignated Area Command sheet/Original Print Make-up Modes for Outside Designated Areas Background Patterns Command Sheets for Make-Up Printing Command SheetsMaking a Command Sheet Features Designated area Area recognized Preferred designated area Put the command sheet on top of the original Diagonal line method C = 2mm Closed area method Command Sheets and Finished Prints Drawing a command sheet using a diagonal line Drawing a command sheet using a closed line Fruit Make-up Printing Press the Make-Upkey Make-up Printing Operation Make-up Samples Original Print Command sheet No.1Sample Original Command sheet No.1 Command sheet No.2 Print ZM-52 Storing Originals Original Storage100 Non-standard size originals 101 Protecting Originals Protecting Stored Originals102 Removing Original Protection Deleting Stored Originals103 104 Select the Yes or No key Image Overlay Storage OverlayOverlay Format On Line Overlay Overlay Format106 Press the On Line key Placing originals in the optional document feeder 107Place the first original on the exposure glass Place originals Docu Ment feeder 108 Date StampPress the Stamp key Placing your originals K in the optional document feeder Placing your original K on Exposure glass109 Stamp 110 If you selected P1,P2 or -1-,-2 If you selected 1/5,2/5111 Enter the first page number withthe←→or~keys Placing your originals K on the exposure glass 112Place the first original as Shown in the illustration 113 Select Stamp with the ← → or Placing your original K on the exposure glass contact glass 114Place your original and press Set your original as shown in the illustration Memory Combine Combining onto a Single-sided Print 116 Placing originals on the exposure glass metric version 117 Placing originals on the exposure glass inch version 118 119 Placing your original K on the exposure glassPlace your originals 120 RepeatPress the q key after all the originals have been scanned Example copying 81/2 ⋅ 11 Koriginals onto 11 ⋅ 17 Lpaper Example copying A4 Loriginals onto A3Lpaper121 122 Set your original 123 124 Originals Optional Document Feeder125 Placing Originals 126 127 Combine PrintingInsert the two originals face up Manual Class Mode with Two or More Originals 128 129 Press the Auto Cycle key Color Printing Using the Optional Color Drum Making Color PrintsChanging the Color Drum Unit 130 131 Make sure the optional color drum lock is securely set 132 Printing in Two ColorsLift drum unit lock lever B1 133 Changing the Drum Size Printing Area At 23C/73F, 65% RHMaster Cut Length 134 Combination Chart 135 136 137 138 Accessing the User Tools Using the ~, , , or key139 Press the User Tools key 140 To the standby display System User Tools Menu141 Set Operatn Mode 142 Initial Setting 143 Mode Setting 144 Default Not to use 145 Default Not to cancel 146 147 Stamp 148 Default Upper Left 149 User Codes Administrator Mode150 On Line Mode 151 152 Time Setting User Tool Menus in Detail153 Press the OK key Enter the year with the number keys Reproduction Ratio Class Enter No154 Press the OK key twice 155 Margin Erase AreaSelect the grade with the ← → or ~ keys Press the OK key 11 No. of Skip Feed If you selected A3 to A6 or 11 ⋅ 17 to 51/2 ⋅ 81/2If you selected p 156 14 No. of Q.start 157 Select the temperature at which Type of Paper158 You use this machine with the ← Stamp Position 159 Position Date 160 P1 or 1/5 Position161 162 163 Make/Chg. PatternPress theqor Clear/Stopkey to edit the pattern Reset Counters Check Counter164 Enter 6 with the number keys, and then press the OK orqkey Chg. User Code If you selected SingleIf you selected All 165 Del. User Code 166 If Your Machine Does Not Operate as You Want 167 When a service call message is shown on the panel display 168 If You Cannot Make Prints as You Want Combine Originals Mode169 Loading Paper 170 Clearing Misfeeds + a Paper Misfeeds in the Paper Feed Section171 Remove the misfed paper 172 Gently pull out the misfed paper from the inside When the master is wrapped around the drum When paper is wrapped around the drum173 Open the front cover When paper is misfed inside the machine Lower drum unit lock lever B1 Take out the drum 175 + C Paper Misfeeds in the Paper Exit SectionSlowly, but firmly pull out the misfed paper 176 Open the front door Lower drum unit look lever B1 + B + E Master Misfeeds in the Master Eject Section 177 178 Pull out lever E3 and remove the misfed master If master misfeeds occur often 179Open the document feeder ADF cover Pull out the misfed original gen- tly To prevent originals misfeeding 180 When the Open Cover/Unit Indicator M Lights Front doorOptional document feeder ADF cov- er 181 182 When the Add Ink Indicator j LightsOpen the front door Pull out the ink holder 183 When the Master End Indicator C Lights 184 185 When the Master Eject Indicator k Lights 186 When Other Indicators Are Lit 187 When Printing on Small Size Paper When Prints Are Not Delivered in a Neat Stack188 Turn off the main switch Poor PrintingDirty Background 189 190 Pull out the drum unit Close the front door Turn on the main switch 191 Faint Prints Black Lines/Stained Prints192 Dos and Donts 193 194 Where to Put Your Machine EnvironmentOptimum environmental conditions Environments to avoid Power Connection Machine ClearanceMain frame 196 Cleaning the Main Frame Maintaining Your Machine Cleaning the Sheet Cleaning the Optional Document Feeder198 Main Frame Print Paper Weight Printing AreaPrint Paper Size Leading Edge Margin Dimensions W ⋅ D ⋅ H WeightPower Consumption Master Eject Unit Capacity Optional Equipment 202 Original Weight Document Feeder OptionOriginal Capacity 203 Twin Color Press Roller Printing System TC-II Option Consumables 205 Index 206 207 Edge Erase key 208 On Line key 209 User Tools key 210 211 212 Operating Instructions