Savin 3360DNP operating instructions Job Separation, Metric version

Job Separation

Job Separation

The print on the top of each print set in the paper delivery tray is pulled by the	1
job separator. This function is useful when you make two or more print sets.

GRJOBS0E

RCAUTION:

•While printing, do not touch the belt at the end of the paper delivery tray or the job separator. Otherwise, an injury might occur.

Limitation

❒In Job Separation mode, the following limitations apply.

❖ Metric version

Minimum paper size	Maximum paper weight	Paper delivery tray capacity
Length: 210mm	127.9g/m2	600 sheets (64g/m2)
Width: 128mm

❖ Inch version

Minimum paper size	Maximum paper weight	Paper delivery tray capacity
Length: 8.3"	34 lb	600 sheets (17 lb)
Width: 5.1"

Note

❒When you use thin paper, it is not recommended to use Job Separation mode. The job separator might tear the paper.

❒If the job separator touches the print image, prints might be marked. In this case, it is not recommended to use Job Separation mode.

❒When you do not use Job Separation mode, you can select the machine con- dition after each print set is fed out to the paper delivery tray with the user tools. See “Auto Class” on p.144 “4. Mode Setting”.

❒If there are less than 10 sheets of paper in the paper delivery tray, the machine may not be able to use Job Separation mode.

77