Savin 3360DNP operating instructions Erasing Center and Edge Margins

Operation

Erasing Center and Edge Margins

When printing from thick books, or

1 similar originals, the binding margin at the center and the edges might ap- pear on prints. To prevent this, per- form the following steps.

Important

❒Be sure to keep the platen cover at an angle of at least 25 degrees with the exposure glass.

❒If you do not press hard on the book while it is scanned, the mar- gin at the center might no be erased completely.

Note

❒If your originals have solid images at the edges, the machine might recognize the solid images as shad- ows and not copy them. In this case, use Edge Erase mode so that only the shadows are not copied. See p.41 “Edge Erase”.

A Set the book on the exposure glass.

B Keep the exposure glass cover at an angle of at least 25 degrees with the exposure glass.

C Press the {Start} key.

Note

❒Press hard on the book with your hand while it is scanned.

D Check the image position on the trial or proof print.

Note

❒If the image position is not cor- rect, adjust it using the [Image =] key. See p.24 “Adjusting the Po- sition of Printed Images”.

E Make your prints.

40