Savin 3360DNP Quality Start Mode, Using Quality Start Manually, Manual Quality Start

Operation

Quality Start Mode

If the machine is not used for a long

1 period of time or you change the color drum unit, the ink on the drum might dry causing print quality to deterio- rate. To solve this problem, you can have the machine carry out a few idle spins of the drum before a print run. This will restore image quality and save you having to make a repeat print run.

You can use this feature in two ways:

❖Manual Quality Start

Choose Quality Start mode for the

next print run manually using the

{Quality Start} key.

❖Auto Quality Start

Have the machine check automati- cally how long ago it was used be- fore each print run. If the machine has not been used for a long time, Quality Start will be used for the print job. By default, Auto Quality Start mode is on. You can turn it off with the user tools. See “Setting Q.start” on p.144 “4. Mode Set- ting”.

Note

❒You can change the number of spins in Manual Quality Start mode with the user tools. See “Idling for Q.start” on p.144 “4. Mode Setting”.

❒You can change the number of spins after the fixed time period has passed in Auto Quality Start mode with the user tools. See “No. of Q.start” on p.144 “4. Mode Set- ting”.

Using Quality Start Manually

A Press the {Quality Start} key.

	Stamp	Image Density
		Lighter	On Line
		Normal
		Darker 1
	Make-Up	Darker 2	Auto On Line
	Over lay	Economy Mode
Skip Feed	Edge Erase	Original Storage	Job Separator

ZDZS050N

B Place your original on the expo- sure glass or in the optional docu- ment feeder.

C Press the {Start} key.

The drum unit idles.

D Make your prints.

76