Savin 3360DNP operating instructions Programs, Storing a Program

Operation

Programs

You can store up to 9 frequently used

1 print job settings in machine memory and recall them for future use.

Note

❒Stored programs are not cleared when you turn off the main switch.

❒Stored programs cannot be delet- ed. If you want to change a stored program, overwrite it.

Storing a Program

A Make the print settings you want to put into memory.

B Press the {Program} key.

D Press the [OK] key.

Note

❒The program numbers (1 to 9) will be displayed in the panel display.

❒If a user program has been pro- tected, that program number will not appear in the panel dis- play. To change a protected user program, see p.73 “Protecting a Program”.

❒If all the user programs have been protected, you cannot store any settings. Press the

[Cancel] key.

E Select the program number you want to store the settings in with the [←] [→] or {~} {}} keys.

C Select [Store] with the [→] or {}}

key. Note

❒ You can also select the program number with the number keys.

F Press the [OK] key.

❒

Note

If this program number is al- ready used, the machine asks whether you wish to overwrite it or not. Press the [Yes] or [No] key.

72