Savin 3360DNP operating instructions Optional Document Feeder, Originals, 125

2. Optional Functions

Optional Document Feeder

Insert a stack of originals in the docu- ment feeder. It will be fed automati- cally.

Originals

Placing the following originals in the document feeder might cause mis- feeds or damage to the originals.

Place the following kinds of originals on the exposure glass:

•Originals heavier than 128g/m2, 34 lb

•Originals lighter than 52g/m2, 14 lb

•Originals smaller than 148mm ⋅ 210mm, 5.9" ⋅ 8.3"

•Originals larger than 297mm ⋅ 864mm, 11.6" ⋅ 34.0"

•Stapled or clipped originals

•Perforated or torn originals

•Curled, folded, or creased origi- nals

•Originals with any kind of coating, such as thermal fax paper, art pa- per, aluminum foil, carbon paper, or conductive paper

•Bound originals such as books

•Damaged originals

The following original sizes placed in the document feeder can be detected.

Metric version	A3 L, B4 L, A4 KL,
	B5 KL, A5KL
Inch version	11" ⋅ 17" L, 81/2" ⋅ 14"
	L, 81/2" ⋅ 11"KL, 51/2"
	⋅ 81/2"KL

Reference

For the original sizes placed on the exposure glass can be detected, see p.13 “Originals”.

Note

❒Place originals after correction flu- id and ink have completely dried. Not taking this precaution could mark the exposure glass and cause marks to be printed.

For standard printing functions, set originals as shown below.

R

R

GRSETT1E

•Originals with glue on them

•Pasted originals

•Originals written in pencil

•Thin originals that are a little stiff

•Originals with index tabs

•Transparent originals such as OHP transparencies or translucent pa- per

If the original is placed in a different direction from the print paper, the machine automatically rotates the original image by 90° to match the print paper direction.

You cannot place originals of differ- ent sizes at the same time.

125