Savin 3360DNP operating instructions If Your Machine Does Not Operate as You Want, 167

5. Troubleshooting

If Your Machine Does Not Operate as You Want

If a malfunction or a misfeed occurs, the following messages will appear on the panel display.

Message	Meaning
Check the original direc- The paper is not placed in the same direction as the original.
tion.	Place the original in the same direction as the paper.
	If you press the {Print} key, the selected paper will be used for print-
	ing.
Size of original and pa- Set a paper size that matches the reproduction ratio you have select-
per is not the same.	ed and your original.
	The reproduction ratio selected by Auto Magnification mode is too
	big or too small.

	Note
	❒ You can make prints if you press the {Print} key.
Set original.	Make prints after confirming whether there is an original on the ex-
	posure glass.
	Make sure that you have changed the original on the exposure glass
	before pressing the {Start} key.
Max. quantity: ****	The number of prints exceeds the maximum print quantity.
	You can change the maximum number of prints that can be made in
	one operation with the user tools. See “Max. Quantity” on p.142 “2.
	Set Operat'n Mode”.
Min. quantity: ****	The number of prints does not exceed the minimum print quantity.
	You can change the minimum number of prints that can be made in
	one operation with the user tools. See “Min. Quantity” on p.142 “2.
	Set Operat'n Mode”.
Drum unit is not set. Set	Slide in the drum until it clicks.
Drum unit.	Make sure that the drum is completely set in position.
Communication error	Turn the main switch off and on.
Turn the main switch off	If the message appears again, contact your service representative.
then on
Overloaded for the de-	Remove the paper from the delivery tray.
livery tray	Reference
Please remove the paper
	See “Delivery Capacity” on p.142 “2. Set Operat'n Mode”.

167