Savin 3360DNP operating instructions Placing Originals, 126

Optional Functions

When you use thin originals, place one original at a time in the document feeder or place them on the exposure glass.

The first 8mm, 0.32", of the leading edge and the last 2mm, 0.08" of the trailing edge cannot be printed. Make

2 sure the leading edge margin is at least 8mm, 0.32", and the trailing edge margin is at least 2mm, 0.08".

Do not stack originals above the limit mark.

Placing Originals

A Adjust the guide to the original size.

B Insert the aligned originals face up into the document feeder.

ZDCH120E

Note

❒To avoid originals misfeeding, fan the originals before placing them in the document feeder.

Limitation

❒Approximately 50 originals (80g/m2, 21 lb) can be inserted at one time in the document feeder. The first (top) original will be fed first.

Note

❒To avoid jamming, fan the orig- inals before placing them in the document feeder.

❒The guides must fit snugly against both sides of the stack.

C Adjust print settings as necessary, and then press the {Start} key.

D Make your prints.

Note

❒If the next original has been placed in the document feeder before the machine stops, that original is fed automatically and a trial print is delivered to the paper delivery tray after the print of the first original is com- pleted. Check the image posi- tion on the trial print of the next

original. If necessary, make proof prints using the {Proof} key to check the image position again.

126