Savin 3360DNP operating instructions Set Operatn Mode, 142

4

User Tools

No.	Mode	Description
7	Data Print	Use to print out the following data.

Note

❒Available settings:

•Log Data (Number of prints made, how many times paper misfeeds occur and so on.)

•Reset Counters (Number of prints and master made under each user code.)

•Store Class (Registered number of students in each class.)

8 Energy Saving You can set the time until the Energy Saver mode starts.

Note

❒Default: 3 Min. (minutes)

2.Set Operat'n Mode

No.	Mode	Description
1	Min. Quantity	The minimum print quantity can be set between 0 and 9999.
		Example: If you specify 20 as the minimum number of prints, runs
		of 20 or more prints will be accepted, print runs of less than 20
		prints will not be accepted.

Note

❒Default: 0

2 Max. Quantity The maximum print quantity can be set between 0 and 9999.

		Note
		❒ Default: 9999
3	CopyCount Dis-	The counter can be set to show the number of prints made (Up),
	play	or the number of prints left to be made (Down).

		Note
		❒ Default: Down
5	Panel Beeper	Turns the beeper on or off.

Note

❒Default: STD. (standard)

❒Available settings:

•ALL OFF (The beeper does not sound when you press keys or when warning messages appear on the panel display.)

•STD. (When you press a key, the beeper does not sound. When warning messages appear on the panel display, the beeper sounds.)

•ALL ON (The beeper sounds when you press a key or when warning messages appear on the panel display.)

6 LCD Contrast You can adjust the brightness of the panel display.

142