Aiwa CSD-TD39, CSD-TD49 Recording, Setting the Sleep Timer, Press REC, Press e to start recording

Page 11

MODE

e PLAY/

PAUSE

w REC

f, g

s STOP

(CSD-TD49 only)

RECORDING

1 Insert a tape with the side to be recorded on facing out and the exposed side facing down.

2 Get ready to record from the source.

To record from a CD, press CD and load the disc. To record from a radio broadcast, press RADIO BAND and tune to a station.

SETTING THE SLEEP TIMER

The unit can be turned off automatically at a specified time.

1 Hold down REPEAT/MODE/SLEEP * until “SLEEP” flashes in the display.

*or MODE on the remote control (CSD-TD49 only)

2 Within 4 seconds, press f or g to specify the time until the power is turned off.

Each time it is pressed, the time changes between 10 and 180 minutes in 10-minute steps.

Specified time

While the sleep timer works, “SLEEP” is displayed.

To check the time remaining until the power is turned off

Repeat step 1 shown above. The remaining time is

3 Press REC.

The unit enters recording pause mode and “REC”

displayed for 4 seconds.

En

flashes slowly in the display.

4 Press e to start recording.

“REC” lights up in the display.

When the selected function is CD, CD play and recording starts simultaneously.

To record only the selected tracks of a CD

1Follow steps 1 to 4 of PROGRAMMED PLAY on page 9 to program tracks.

2Press REC.

3Press e.

To stop recording, press s.

To pause recording (only when the source is RADIO), press e. During recording pause mode, “REC” flashes slowly. To resume, press it again.

To erase recording, press TAPE and start recording (press REC then e).

After recording, press POWER 6 STANDBY/ON to turn the power off.

To cancel the sleep timer

Repeat step 1 to display the remaining time and hold down REPEAT/MODE/SLEEP again until “OFF” is displayed.

Simple sleep timer setting

Press REPEAT/MODE/SLEEP while the power is off. The unit is turned on with the last function, and the sleep timer is automatically turned on with the 30-minute setting.

Select the function, if you need, and start playback.

To prevent accidental erasure

Break off the plastic tabs on the cassette tape with a screwdriver or other pointed tool after recording.

To record on the tape again

Cover the tab openings with adhesive tape, etc.

Side A

Tab for side A

ENGLISH 11

Image 11
Contents English See Español Ver la página Français Voir RADIO-CASSETTE Lecteur DE CD StereoOWNER’S Record InstallationExplanation of Graphical Symbols Lightning Electric PowerDamage Requiring Service MaintenanceMaintenance Using on AC house currentUsing on batteries Copyright REPEAT/MODE/SLEEP Press f, g Tuning -, + to select a stationTuner Operation Press Radio Band * repeatedly to select the desired bandSound Adjustment Presetting StationsPress e PLAY/PAUSE to start play CD OperationPress CD Press f or g to select a track, then press s to store it Programmed PlayREPEAT, Random Play Press e PLAY/PAUSE to start playback Tape OperationPlayback Press TapePress e to start recording Setting the Sleep TimerRecording Press RECRemarque