DISPLAY
MODE
BAND 
EQ
VOL k, i
e PLAY/ | f, g |
PAUSE | |
| s STOP |
|
PRESETTING STATIONS
You can preset up to 15 stations in each band.
1 Select a station.
2 Press s STOP/SET/CLEAR * once so that “M” is displayed to store the station.
A station is assigned a preset number, beginning from 1 in consecutive order for each band.
Preset number
Frequency
*or s STOP on the remote control
3 Repeat steps 1 and 2.
The next station will not be stored if a total of 15 preset stations have already been stored for a band.
To listen to preset stations
Select a band then press PRESET or e PLAY/ PAUSE repeatedly.
To select a preset number directly with the remote control
Press the numbered buttons
To select number 15, press +10 and 5. To select number 10, press +10 and 0.
To clear a preset station
Select the preset number first. Within 4 seconds, hold down s until “M” and the preset number disappear. The higher numbers in the band are decreased by one.
SOUND ADJUSTMENT
Volume or tone adjustment does not affect recording.
VOLUME (VOL, CSD-TD49 only)
Press VOLUME N or M on the unit or VOL i or k on the remote control. The volume level is displayed as a number from 0 to 25.
•The volume level is automatically set to 14 if the power is turned off when the volume level is set to 15 or more.
•Pressing DISPLAY on the remote control displays the adjusted volume level
3-MODE EQ* (equalizer)
Press
The equalizer mode changes to R (Rock), P (Pop), J (Jazz) or no equalization, cyclically.
Rock - Emphasizes the high and low range of music.
Pop - Emphasizes voice and midrange of music. Jazz - Emphasizes the low range of music.
* or EQ on the remote control
|
| |
En | ||
The | ||
frequency sound. | ||
| ||
Press |
|
ENGLISH 7