Dacor PD, 24GN Plumbing Connections, Installing the Unit in the Cabinet, Level the Dishwasher

Page 11

Installation Instructions

Plumbing Connections

1.Connect one end of the 3/8” flexible braided fill hose to the water supply valve.

2.Route the hose through the utility access hole in the side of the appliance cut-out. Put the unconnected end of the hose over a bucket. Turn on the water to clean any debris out of the supply line and fill the hose for leak testing. Turn the valve off.

3.Keeping as much water as possible in the hose, route it through the bottom of the dishwasher chassis and connect it to the water inlet. Access the water inlet through the hole on the left side of the chassis.

Fill hose

Water inlet

Access hole in side

Dishwasher Left Side

4.Turn on the water valve and check both ends for leaks.

5.Using the included plastic fasteners, attach the left side access panel. NOTE: The top edge of the access panel slides behind the chassis corner as shown below.

Chassis

corner

Installing the Unit in the Cabinet

•Make sure the water valve is off before sliding the unit into the cabinet.

•Care should be exercised when the appliance is installed or removed to reduce the likelihood of damage to the power cord or hoses.

•Before sliding the unit into the cut-out, make sure the hoses and wiring are positioned in the utility cut-outs as shown on the facing page.

Level the Dishwasher

Level the dishwasher using the adjustable legs on the front and back before sliding the unit into the cut-out.

1.Measure the height of the front and back of the cut-out with a tape measure.

2.Measure the height of of the front and back of the dishwasher.

3.Using a crescent wrench, loosen the leg nut on all four legs and turn the legs to adjust them. The maximum height of the dishwasher must be 1/8” lower than the maximum height of the cut-out.

Leg nut

Leg

 

nut

Front

Rear

leg

leg

4.Remove the lower rack from the dishwasher and place a level on the tank side wall rack guides to verify the unit is level front to back. To verify left to right level, place a level on the front door jamb.

5.Adjust the legs until the unit is level and does not exceed the height specifications in step 3.

6.Tighten the leg nut to the chassis to secure the leg in place.

NOTE: The leg nuts can be removed to make the dishwasher lower. See page 10.

Access panel

Slide this edge behind

 

chassis corner

6.Slide the drain hose into the utility access hole in the side of the appliance cut-out. See facing page.

9

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Inch Dishwasher Dacor, all rights reserved Before You Begin Table of ContentsImportant Safety Instructions General Safety Precautions Technical Design SpecificationsProduct Specifications DimensionsPreparing the Location Preparing for InstallationPreparing the Drain Power Supply PreparationElectrical Specifications Plumbing PreparationVerify the Package Contents Installation SpecificationsJunction Box Location Junction Box WiringElectrical Connection To House Junction Box With External Ground Installation InstructionsIf the unit is to be connected directly to the house wiring Standard 3-Wire ConnectionLevel the Dishwasher Installing the Unit in the CabinetPlumbing Connections Slide the Dishwasher into the Cutout Cabinet Panel Installation Model ID24 OnlyInstall the Anti-Tip Brackets Drain Line Installation Pre-verification Check List Verifying Proper Operation

PD, 24GN specifications

Dacor 24GN,PD is an exceptional product that brings together advanced technology and elegant design, making it an exemplary choice for modern kitchens. As a 24-inch gas range, it is designed with both functionality and aesthetics in mind, appealing to culinary enthusiasts and home chefs alike.

One of the standout features of the Dacor 24GN,PD is its powerful 18,000 BTU burner, which provides rapid heat for cooking a variety of dishes, from steaming vegetables to searing meats. This high-performance burner ensures precision and control, enabling users to achieve the desired results across different cooking methods. The range also includes a simmer burner that allows for delicate tasks such as melting chocolate or preparing sauces, demonstrating the versatility of this appliance.

Dacor incorporates innovative technologies into the 24GN,PD, such as its renowned RapidHeat technology. This feature allows for quicker preheating times, so you can start cooking without unnecessary delays. Additionally, the range is equipped with an intuitive control panel that includes a digital display, providing precise temperature settings and ease of operation for every user.

The interior of the oven is no less impressive, featuring a large capacity that accommodates multiple dishes at once. The oven is also designed with a dual-fuel functionality, allowing users to enjoy the benefits of both gas and electric cooking. This combination elevates baking to new levels, as it offers more even heat distribution and consistent results.

Moreover, the Dacor 24GN,PD is designed with a sleek, modern aesthetic. Available in luxurious finishes, including stainless steel, it seamlessly integrates into any kitchen decor. The range boasts sturdy construction, ensuring durability and reliability over time.

Cleaning is made easy with its self-cleaning mode, which efficiently eliminates residue and food particles with minimal effort. The oven racks are also designed to be removable, further simplifying the cleaning process.

In summary, the Dacor 24GN,PD is a top-tier gas range that combines high performance with modern technology and aesthetic appeal. With its powerful burners, innovative features, and elegant design, it is an ideal addition to any kitchen, providing users with the tools they need to create culinary masterpieces. Whether you're an experienced chef or a cooking novice, this range offers the versatility and precision needed to elevate your culinary experience.
Top Page Image Contents