Electrical Connection, Junction Box Location

Installation Specifications

warning

•Do not install the dishwasher unless the electrical service provided meets the dishwasher specifications (see page 5).

•A qualified technician must complete the installation of this built-in appliance. The owner is responsible to make sure the dishwasher is properly installed. Improper connection of the electrical wiring may create an electric shock or fire hazard and may result in damage to the dishwasher’s electrical system.

•To avoid an electrical shock hazard, turn off power to the electrical outlet or junction box at the circuit breaker panel or fuse box before proceeding. Do not turn on the power or water supply until instructed to do so on the following pages.

•Do not allow any material, including the hoses or electrical wiring to be directly behind the dishwasher while pushing it into the cut-out opening. Carefully pull the slack out of both hoses and the wiring from outside the cut-out during push back to prevent pinching. An electric shock hazard or water damage may result from pinched wires or hoses. Damage due to improper installation is not covered under warranty.

Electrical Connection

1.Make sure power to the electrical receptacle or junction box is off.

2.Before connecting the wiring and the plumbing, push the dishwasher into position with the back of the unit about six (6) inches in front of the cut-out.

3.Remove the two (2) screws that hold the toe kick assembly in place and remove it. NOTE: Do not reinstall the toe kick until the dishwasher is completely installed and tested.

	Door
	Retaining screw,	Toe kick
	Retaining screw,	assembly
	2 places	assembly
	2 places

4.Remove the dishwasher junction box cover screw. The junction box is mounted to the dishwasher chassis below the door.

Screw

Junction Box Location

5.Remove the junction box cover.

6.Install a 3/4” UL/CSA approved strain relief on the base of the dishwasher junction box.

	Strain	Wire
		nuts
	relief

Base

Ground connection

Junction Box Wiring

7.Strip the three (3) wires on the end of the electric cord or one end of the wire that will connect to the house wiring.

8.Feed the end of the wire or cord through the dishwasher chassis into the junction box base through the strain relief.

9.Loosen the grounding screw on the base and connect the green wire. Tighten it into place.

10.Connect the power cord (or house wiring) black and white wires to the black and white wires inside the junction box. Match the colors. Use wire nuts to connect them.

11.Tighten the strain relief. Pull gently on the wiring from the back to make sure it is secure.

12.Replace the junction box cover and screw.

PD, 24GN specifications

Dacor 24GN,PD is an exceptional product that brings together advanced technology and elegant design, making it an exemplary choice for modern kitchens. As a 24-inch gas range, it is designed with both functionality and aesthetics in mind, appealing to culinary enthusiasts and home chefs alike.

One of the standout features of the Dacor 24GN,PD is its powerful 18,000 BTU burner, which provides rapid heat for cooking a variety of dishes, from steaming vegetables to searing meats. This high-performance burner ensures precision and control, enabling users to achieve the desired results across different cooking methods. The range also includes a simmer burner that allows for delicate tasks such as melting chocolate or preparing sauces, demonstrating the versatility of this appliance.

Dacor incorporates innovative technologies into the 24GN,PD, such as its renowned RapidHeat technology. This feature allows for quicker preheating times, so you can start cooking without unnecessary delays. Additionally, the range is equipped with an intuitive control panel that includes a digital display, providing precise temperature settings and ease of operation for every user.

The interior of the oven is no less impressive, featuring a large capacity that accommodates multiple dishes at once. The oven is also designed with a dual-fuel functionality, allowing users to enjoy the benefits of both gas and electric cooking. This combination elevates baking to new levels, as it offers more even heat distribution and consistent results.

Moreover, the Dacor 24GN,PD is designed with a sleek, modern aesthetic. Available in luxurious finishes, including stainless steel, it seamlessly integrates into any kitchen decor. The range boasts sturdy construction, ensuring durability and reliability over time.

Cleaning is made easy with its self-cleaning mode, which efficiently eliminates residue and food particles with minimal effort. The oven racks are also designed to be removable, further simplifying the cleaning process.

In summary, the Dacor 24GN,PD is a top-tier gas range that combines high performance with modern technology and aesthetic appeal. With its powerful burners, innovative features, and elegant design, it is an ideal addition to any kitchen, providing users with the tools they need to create culinary masterpieces. Whether you're an experienced chef or a cooking novice, this range offers the versatility and precision needed to elevate your culinary experience.