Dacor 24GN, PD Cabinet Panel Installation Model ID24 Only, Slide the Dishwasher into the Cutout

Page 12

Installation Instructions

Installing the Unit in the Cabinet

(continued)

NOTE: The leg nuts can be removed to make the dishwasher lower. To do so:

•Turn the leg until it comes out of the chassis.

•Remove the nut from the leg.

•Re-thread the leg into the chassis.

•Reach inside the chassis and thread the nut onto the top of the leg.

2.To attach the anti-tip bracket anchors, insert the anchoring screws through the 1/2” diameter access holes inside the dishwashing compartment on the ceiling and the sides, near the front. Make sure that the anchoring screws pass through the anti-tip brackets located on the outside of the dishwasher.

 

Slide the Dishwasher into the Cutout

•Pull the electrical wiring and both hoses (drain and water supply) through the utility access hole in the side of the cabinet as you slide the dishwasher into the opening. Stop when the dishwasher contacts the back wall or aligns with the front cabinet opening.

Install the Anti-Tip Brackets

Top anti-tip

bracket

Side anti-tip

bracket

Cabinet Panel Installation (Model ID24 Only)

Install the custom panel and/or custom toe kick according to the instructions on the included template (Dacor PN 101934). If the panel requires decorative door hardware, attach it before panel installation.

CAUTION

•To prevent corrosion and the possibility of the panel falling off, use only stainless steel screws where instructed.

•The provided mounting screws are designed for panels with a thickness of 5/8” to 3/4”. Smaller panels may require different mounting hardware to prevent damage to the outside surface.

•Failure to construct the custom panel and/or toe kick as instructed on the template may result an improper fit and may prevent the door from closing properly.

CAUTION

•Make sure to anchor at least one anti-tip bracket on each side of the dishwasher.

•The anchoring material must be no more than 1/4” (6mm) from the anti-tip bracket.

The anti-tip brackets protect against possible tipping caused by heavy bottom rack loads on the door.

1.There are anti-tip mounting locations provided around the top and sides of the dishwasher front frame.

CUSTOM PANEL INSTALLATION (ID24 ONLY)

10

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Inch Dishwasher Dacor, all rights reserved Table of Contents Important Safety InstructionsBefore You Begin General Safety Precautions Design Specifications Product SpecificationsDimensions TechnicalPreparing for Installation Preparing the LocationPower Supply Preparation Electrical SpecificationsPlumbing Preparation Preparing the DrainInstallation Specifications Verify the Package ContentsJunction Box Wiring Electrical ConnectionJunction Box Location Installation Instructions If the unit is to be connected directly to the house wiringStandard 3-Wire Connection To House Junction Box With External GroundInstalling the Unit in the Cabinet Plumbing ConnectionsLevel the Dishwasher Cabinet Panel Installation Model ID24 Only Install the Anti-Tip BracketsSlide the Dishwasher into the Cutout Drain Line Installation Verifying Proper Operation Pre-verification Check List

PD, 24GN specifications

Dacor 24GN,PD is an exceptional product that brings together advanced technology and elegant design, making it an exemplary choice for modern kitchens. As a 24-inch gas range, it is designed with both functionality and aesthetics in mind, appealing to culinary enthusiasts and home chefs alike.

One of the standout features of the Dacor 24GN,PD is its powerful 18,000 BTU burner, which provides rapid heat for cooking a variety of dishes, from steaming vegetables to searing meats. This high-performance burner ensures precision and control, enabling users to achieve the desired results across different cooking methods. The range also includes a simmer burner that allows for delicate tasks such as melting chocolate or preparing sauces, demonstrating the versatility of this appliance.

Dacor incorporates innovative technologies into the 24GN,PD, such as its renowned RapidHeat technology. This feature allows for quicker preheating times, so you can start cooking without unnecessary delays. Additionally, the range is equipped with an intuitive control panel that includes a digital display, providing precise temperature settings and ease of operation for every user.

The interior of the oven is no less impressive, featuring a large capacity that accommodates multiple dishes at once. The oven is also designed with a dual-fuel functionality, allowing users to enjoy the benefits of both gas and electric cooking. This combination elevates baking to new levels, as it offers more even heat distribution and consistent results.

Moreover, the Dacor 24GN,PD is designed with a sleek, modern aesthetic. Available in luxurious finishes, including stainless steel, it seamlessly integrates into any kitchen decor. The range boasts sturdy construction, ensuring durability and reliability over time.

Cleaning is made easy with its self-cleaning mode, which efficiently eliminates residue and food particles with minimal effort. The oven racks are also designed to be removable, further simplifying the cleaning process.

In summary, the Dacor 24GN,PD is a top-tier gas range that combines high performance with modern technology and aesthetic appeal. With its powerful burners, innovative features, and elegant design, it is an ideal addition to any kitchen, providing users with the tools they need to create culinary masterpieces. Whether you're an experienced chef or a cooking novice, this range offers the versatility and precision needed to elevate your culinary experience.
Top Page Image Contents