dPLAY/DIR/PRESET |
|
sSTOP/CLEAR | TAPE/REV MODE |
| |
aPAUSE/SET |
|
wREC/REC MUTE |
|
r, t | TAPE |
| OPEN/CLOSE |
CTAPE OPERATION
Use Type I (normal) tapes only.
PLAYBACK
1 Press TAPE/REV MODE.
The power is turned on.
If the tape has been inserted, play begins.
2 Press TAPE OPEN/CLOSE to open the cassette compartment and load a tape with the exposed side facing forward.
To change the playback side, press d during play.
x: Plays the side facing up. c : Plays the opposite side.
To select a reverse mode, press TAPE/REV MODE
repeatedly.
: Plays one side only.
: Plays both sides once. Play stops at the end of the reverse side.
: Plays both sides repeatedly.
To set the tape counter to “0000”
Press s in stop mode. The counter is also set to “0000” when opening the cassette compartment.
Press TAPE OPEN/CLOSE to close the compartment.
3 Press dPLAY/DIR/PRESET to start playback.
Reverse mode
Tape counter Playback side of the tape
sSTOP/CLEAR – Stops play.
aPAUSE/SET – Pauses play. To resume play, press again.
r/t – Rewinds/ fast forwards. To stop the winding, press s.
After listening, press POWER 6STANDBY/ON to turn the power off.