POWER |
|
6STANDBY/ON |
|
dPLAY/DIR/PRESET |
|
sSTOP/CLEAR | CD |
|
aPAUSE/SET
r, t | CD OPEN/ | |
CLOSE | ||
|
BCD OPERATION
1 Press CD.
The power is turned on.
2 Press CD OPEN/CLOSE to open the disc compartment. Set a disc with the printed side up, then press CD OPEN/CLOSE to close the disc compartment.
Total number of tracks and total playing time are displayed. It will take about 15 seconds when loading a
3 Press dPLAY/DIR/PRESET to start play.
The number of the track being played and elapsed playing time are displayed.
To start play when the power is off, press CD. The power is turned on and play of the loaded disc begins (Direct Play Function).
To select a track directly with the remote control,
press the numbered buttons
Example:
To select number 25, press +10, +10 and 5. To select number 10, press +10 and 0.
After listening, press POWER 6STANDBY/ON to turn the power off.
To remove the disc
Open the disc compartment. Pick up the disc, holding its edge, while pressing the center pivot gently.
sSTOP/CLEAR – Stops play.
aPAUSE/SET – Pauses play. To resume play, press again.
r,t – Searches for a particular point during playback. Hold down r or t and then release it.
–Skips to the beginning of a track. Press r or t repeatedly.
NOTE
•Do not use irregular shape CDs (example: heart- shaped, octagonal ones).
It may result in malfunctions.
•Do not place more than one disc in the disc compartment.
•Do not touch the lens. Doing so may cause malfunctions.
•The unit may not play a
•Do not attach any seal or label to either side (the recordable side or the labeled side) of a
•When loading an unrecorded