Aiwa CSD-NS1 Timer Operation, Timer PLAYBACK/RECORDING, Press Enter or a Prepare the source

VOLUME/TIMER

TAPE/REV MODE,	ENTER
TUNER/BAND,	TIMER
CD

aSLEEP

r, t

DTIMER OPERATION

TIMER PLAYBACK/RECORDING

The unit can be turned on at a specified time every day with the built-in timer.

Make sure the clock is set correctly.

NOTE

•If you use the unit after setting the timer, repeat steps 6 and 7.

•Timer recording is available only when the source is

TUNER.

1 Press TIMER twice for timer play or three times for timer recording so that “5” or “5REC” flashes in the display.

2 Turn VOLUME/TIMER to specify the timer-on time.

ror t is also available. Holding it down changes the time in 20-minute units.

Timer-on time

To check the timer setting

1Press TIMER twice or three time. The timer-on time is displayed.

2Press ENTER.

The timer-activated period is displayed.

3Press ENTER to restore the display.

To cancel the timer standby mode

Press TIMER repeatedly so that “5” or “5 REC” disappears.

To reset the timer

Repeat all the steps above.

3 Press ENTER or a.

4 Turn VOLUME/TIMER to specify the timer-activated period.

The time changes between 5 and 180 minutes in 5-minute units. r or t is also available.

5 Press ENTER or a.

6 Prepare the source.

To listen to a CD, press CD and load the disc. To listen to a tape, press TAPE/REV MODE and load the tape.

To listen to a radio broadcast, press TUNER/ BAND and tune to the desired station.

To record from a radio broadcast, press TUNER/BAND and tune to the desired station, and load the tape to be recorded on.

7 Adjust the volume and tone, then turn off the unit.

The unit turns on with the selected source at the specified timer-on time, and turns off after the specified timer-activated period.

12ENGLISH