Sharp MD-MT821 manual To check the remaining disc time, Double timerecording in monaural mode

WTo check the remaining disc time

While recording, you can check the remaining time available on the disc.

Press the DISP button while recording or while in the recording pause mode.

Remaining recordable time

0 When the DISP button is pressed again, the unit will return to the initial display.

Note:

0 The display of the remaining disc time may vary slightly from the actual remain- ing time. (Page 38)

nTo create your own track numbers while recording

You can create your own track numbers at special points in a recording, so that these points can easily be found later.

At any point where you want to create a track number while recording, press the REC button (Remote control : move the shuttle switch to BASS).

0The track number will be written on the disc and the recording will continue un- interrupted.

WDouble timerecording in monaural mode

When recording in the monaural long-play mode, it can be about twice as long as the recording time available for a stereo record- ing. The monaural long-play mode is very useful for recording conferences or lectures.

Press the MODE button while the record- ing is paused.

0Each time this button is pressed, the dis- play will switch between the stereo mode and the monaural long-play mode.

tights up while in the monauralI long-play mode.

Notes:

If input is from a stereo source, the sounds from the left and right channels will be combined.

Although the monitor sound you hear in the headphones while recording is in ste- reo, recording will be monaural.

MiniDiscs recorded in the monaural long-play mode may not play on other MD players.

When a recording is made in the mon- aural long-play mode, you will be able to play back the MiniDisc twice as fast as the normal playback speed. (Page

24)

When the unit is stopped after a record- ing has been made in the monaural long- play mode, the recording mode will re- turn to the stereo mode automatically.

17