nTo change disc names or track names
Some MiniDiscs created on other equip- ment may have more than 100 characters in a track name or disc name. The charac- ters from the 101 st character and on can- not be corrected or changed.
To delete characters:
1 Put the unit in the character input mode.
0 To delete characters in a disc name, perform steps 1 - 2 on page 28.
0 To delete characters in a track name, perform steps 1 - 3 on page 29.
2 Press the VOL + or VOL - button to move the cursor to the character you want to delete.
3 Press the BASS button.
0 The character will be erased.
4 Press the EDIT button.
To add characters:
1 Put the unit in the character input mode. 0 To add characters to a disc name, per-
form steps 1 - 2 on page 28.
•To add characters to a track name, perform steps 1 - 3 on page 29.
2 Press the VOL + or VOL - button to move the cursor to the right of the char- acter, where you want to add a new char- acter.
3 Preform steps 3 - 5 in the “Disc name” section.
4 Enter the new character you want, and press the EDIT button.
nName/stamp
Master MiniDisc (Prerecorded
MiniDisc
2.The character information, such as the disc name and track names is transferred
I
1 Record the sound from the master
MiniDisc onto a recordable MiniDisc.
Playback unit | Recording unit |
Master MiniDisc | Recordable MiniDisc |
0 Refer to the standard recording method. (Pages 8 - 14)
0 At this point, only the sound is re- corded. No character information is transferred.
0 Check whether the total number of tracks on the newly recorded MiniDisc matches the total number of tracks on the master MiniDisc. If they do not match each other, combine or divide tracks using the edit operation. (Pages 27 - 28)
•This function can not be performed from playback only MiniDiscs.
2 When the recording is complete, remove the newly recorded MiniDisc and load the master MiniDisc into the
for the newly recorded MiniDisc.
30
