Sharp MD-MT821 manual Lmportant, Volume setting, Concern for others when listen- ing to MiniDiscs

4

		0
•	- I

W lmportant

Do not wear your headphones when you are crossing streets or near traffic.

Do not use your headphones while driv- ing a motor vehicle, it may create a dan- gerous traffic hazard and may be ille- gal. Remember to obey all of the safety rules in your area.

Do not play the unit at a high volume. Hearing experts advise against ex- tended listening at high volume levels. If you experience ringing in your ears, reduce the volume or discontinue use.

W Volume setting

If the volume is adjusted according to your usual expectations of noise, you may dam- age your hearing due to the high volume.

Reduce the volume before starting to play. MiniDiscs, compared to ordinary cassette tapes, have very little noise.

nConcern for others when listen- ing to MiniDiscs

While listening to music, the sound escap- ing from your headphones may annoy people around you.

If you are using the unit in particularly crowded places (such as on trains or buses), reduce the volume to avoid disturb- ing people around you.

nStoring the unit

Avoid using or leaving the unit in the following places.

Places exposed to direct sunlight for many hours (especially in cars with the doors and windows closed) or near heat- ers.

(The cabinet may deform, change color or malfunction.)

Places exposed to water.

Places exposed to excessive dust. Places where temperatures are exces- sively high or low.

Places (bathrooms) where the humidity is extremely high.

Places with strong magnetic fields such as TVs or loudspeakers.

Places exposed to vibration.

0Places where sand can easily enter the ‘inside of the unit (beaches etc.).

0 If the unit is used near radio tuners or TVs, noise and/or picture interference may result. If you experience these prob- lems, move the unit away from such de- vices.

nPrecautions

To avoid accidental electric shock or other possible problems, observe the precautions listed below.

Do not disassemble or modify the unit. Do not drop or subject the unit to shock. Do not use the unit near open flames.

Do not spill liquid on the unit.

Do not use an external power supply, other than the 5V DC power supply packaged unit.

SHARP is not responsible for damage due to improper use. Refer all servicing to a SHARP authorized service center.

3