Sharp MD-MT821 manual Divide, Checking

nMove

1 Play the track to be moved, and press the )I1 button.

0 The unit will enter the pause mode.

2 Press the EDIT button to select “MOVE”.

To move the fifth track

3 Press the ENTER/SYNC button.

0 To cancel the operation, press the U:OFF button.

4 Move the HI REC LEVEL w shuttle switch to select the direction to move. 0 To increase the track number . . . m 0 To decrease the track number . . ..m

.j305+ 01 ? 1 1485+ 03 3 1

(Checking the	(To move it to the
movement)	third track)

5 Press the ENTER/SYNC button again.

0 The track will be moved, and the unit will be paused at the beginning of the track.

Note:

0When a track has been moved, the other tracks which are affected by the move will be assigned new track numbers au- tomatically.

Example: When moving the fifth track.to the third track, the old third track will be- come the new fourth track and the old fourth track will become the new fifth track.

W Divide

1Start playing the track you want to di- vide into two. Press the )I1 button at the point where you want to divide the track.

0 The unit will enter the pause mode.

2 Press the EDIT button to select “DI- VIDE”.

To divide the fourth track

3 Press the ENTER/SYNC button.

0 To cancel the operation, press the U:OFF button.

(Confirming the split)

4 Press the ENTER/SYNC button again.

•The track will be divided into two tracks, and the unit will be paused at the beginning of the second of the two tracks.

•The numbers of the tracks which come after the divided track will be increased by one automatically.

Notes:

When a track that has a name is divided, the two new tracks will have the same name. However, in the TOC FULL con- dition, the second track may not be named.

Each disc can hold up to 255 tracks. However, even if the number of assigned tracks has not reached 254, it might not be possible to make any further divisions of tracks.

27