Sharp MD-MT821 manual Input sensitivity Output level Dimensions Weight, Input jack Output jack

0The continuous recording time is for analog inputs when the volume level is set to “VOL 0”.

0 The continuous play time shows the value when the volume level is set to “VOL15”. 0 The above values are the standard values when the unit is charged and used at an

ambienttemperature of 68”F(20°C).

0 The operating time when using an alkaline battery may be different, depending on the type and manufacturer of the battery, and on the operating temperature.

Input sensitivity:

Output level:

Dimensions:

Weight:

Input jack:

Output jack:

Recording level 1 Reference input level 1 Input impedance 1

MIC H		0.25 mV		10	kohms
MIC L		2.5 mV		10	kohms
LINE	)	100 mV	1	20kohms

Width: 3-l/4” (82.5 mm)

Height: 13/16” (20.7 mm)

Depth: 3-l/16” (77.9 mm)

0.39 Ibs. (177 g ) with rechargeable battery

Line/optical digital, microphone (powered by the main unit) Headphones (impedance: 19 ohms)/remote control unit

nMiniDisc Recorder

Type:

Signal readout: Audio channels: Frequency response: Rotation speed: Error correction: Coding:

Recording method: Sampling frequency:

Wow and flutter:

Portable MiniDisc recorder

Non-contact, 3-beam semi-conductor laser pick-up Stereo 2 channels/monaural (long-play mode) 1 channel 20 - 20,000 Hz (+/-3 dB)

Approx. 400 --900 rpm.

ACIRC (Advanced Cross Interleave Reed-Solomon Code) ATRAC (Adaptive Transform Acoustic Coding), 24-bit computed type

Magnetic modulation overwrite method

44.1 kHz (32 kHz and 48 kHz signals are converted to

44.1kHz, and then recorded. Unmeasurable (less than +/-O.001% W. peak)

41