Many potential “problems” can be resolved by the owner without calling a service techni- cian.
If something seems to be wrong with this product, check the following before calling your authorized SHARP dealer or service center.
| PROBLEM |
| CAUSE | |||
|
|
|
| 0 Is the AC adaptor disconnected? | ||
The unit does not turn | 0 | Is the battery exhausted? | ||||
0 Is the unit in the hold mode? | ||||||
on. |
|
|
| 0 Has condensation formed inside the unit? | ||
|
|
|
| 0 | Is the unit being influenced by mechanical shock or by | |
|
|
|
|
| static electricity? | |
|
|
|
|
| ||
|
|
|
| 0 Is the volume set too low? | ||
No sound is heard from | 0 Is the remote control unit or the headphones plugged in? | |||||
the headphones. | 0 Are you trying to play a MiniDis withc data on it instead of | |||||
|
|
|
|
| a MiniDis containing music? | |
|
|
|
|
|
| |
When | the | operation | 0 | Is the unit in the hold mode? | ||
0 | Is the battery exhausted? | |||||
buttons | are pressed, the | |||||
0 | Is the remote control unit plug or the headphone plug | |||||
unit does | not | respond. | ||||
| inserted firmly? | |||||
|
|
|
|
| ||
|
|
| ||||
Some sounds | are | 0 Is the battery exhausted? | ||||
skipped. |
|
| 0 Is the unit being subjected to excessive vibration? | |||
|
|
|
|
| ||
The MiniDis | cannot be | 0 Has the track number or character information been | ||||
| written on the disc yet? | |||||
ejected. |
|
|
| |||
|
| 0 | Is the unit in the recording or editing mode? | |||
|
|
|
| |||
|
|
|
|
| ||
|
|
|
| 0 Is the MiniDis protected against accidental erasure? | ||
|
|
|
| 0 | Is the unit connected properly to the other equipment? | |
Recording | and editing | 0 | Is the AC adaptor unplugged or did a power failure | |||
| occur while recording or editing? | |||||
are impossible. |
| |||||
0 Is the unit in the hold mode? | ||||||
|
|
|
| |||
|
|
|
| 0 Is an optical signal being output from the external | ||
|
|
|
|
| equipment? | |
|
|
|
|
| Read the operation manual for the external equipment. | |
|
|
|
|
|
| |
When this product is subjected to stron external interference (mechanical shock excessive static electricity, abnormal sup- ply voltage due to lightning, etc.) or if it is operated incorrectly, it may malfunction. If such a problem occurs, do the following:
1.Unplug the AC adaptor from the AC out- let.
2.Remove the battery.
3.Leave the unit completely unpowered for approximately 30 seconds.
4.Plug the AC adaptor back intog the AC outlet and retry the operation. ,
If strange sounds, smell or smoke come out of the unit or an object is dropped into the unit, remove the AC adaptor from the AC outlet immediatelv and contact a authorised SHARP service center.
3 7
