Sharp MD-MT821 manual nRecording from CDs or MDs Synchro recording, To interrupt recording

nRecording from CDs or MDs (Synchro recording)

0Svnchro recording is a method that detects the playback sound from the source equip- ment. When sound is present, it automatically s t a r t s recording. When the sour&is silent, the recordina will be paused

1.connect the external equipment. (See page 8.)

. Insert a recordable MiniDisc.

0

3 Press the REC button.

0 To record from a tuner, first tune in a broadcast.

0 To record from a CD, first start play- ing the track you want to record.

4 While playing sound from the external equipment connected to this unit, move the H1 REC LEVEL H shuttle switch to adjust the recording level.

OdB -4dB

0 Adjust the recording level so that the maximum sound volume from the source makes the reading swing somewhere between -4 dB and 0 dB.

0 To record from a CD, first adjust the recording level. Then put the equip- ment connected to this unit into the playback stand-by mode.

5 Press the ENTER/SYNC button.

6 Begin playback on the source equip- ment.

0 Recording will begin automatically.

To interrupt recording:

When the source equipment is stopped, the unit will enter the synchro recording stand-by mode. When playback is re- sumed, a recording will be resumed.

If a silence lasts for 3 seconds or more, the recording will be paused.

Pressing the HI button on this unit (when in this mode) will cause the unit to enter the recording stand-by mode and cancel the synchro recording mode.

To stop recording:

Press the U:OFF button.

0 If the unit is left unattended after the recording is complete, the power will automatically shut off in approximately 2 minutes.

10