![W Combine](/images/new-backgrounds/28321/2832157x1.webp)
W Combine
1 Start playing the last of the two tracks you want to combine, and press the ,I! button.
0 The unit will enter the pause mode.
2 Press the EDIT button to select “COM- BINE”.
To combine the fifth and sixth tracks
3 Press the ENTER/SYNC button.
0 To cancel the operation, press the U:OFF button.
1305+ 06 ? 1 (Confirming the combination)
4 Press the ENTER/SYNC button again.
0 The two tracks will be combined, and the unit will be paused at the begin- ning of the combined track.
0 The numbers assigned to the tracks following the combined track will be decreased by one automatically.
To combine two
When one or both tracks to be combined have a name:
The first track name will be used. However, when the first track does not have a name, the second track name will be used.
In the following cases, tracks cannot be combined.
Tracks recorded in the monaural long- play mode and tracks recorded in the stereo mode.
Tracks recorded from digital inputs and tracks recorded from analog inputs. Tracks whose recording time is less than 12 seconds.
H Disc name
0 Discs can be named using a maximum of 100 characters.
0 Up to 1,700 characters (approximately) can be used in the disc and track names on a single MiniDisc.
1While in the stop mode, press the EDIT button to select “DISC NAME”.
2 Press the ENTER/SYNC button.
0 The unit will enter the character input mode.
0 To cancel the operation, press the U:OFF button.
1
-.&ii- .la. . oc+m
3 Press the DISP button repeatedly to se- lect the type of characters.
0 The first 3 characters in the group of the selected characters will be dis- played for about 1 second.
ABC(Capital letters)
abc
C123(Numbers and symbols)
4 Move the m REC LEVEL m shuttle switch repeatedly to select the first let- ter in the name.
0 When the button is pressed continu- ously, the displayed character will change rapidly.
28