Sharp MD-MT821 manual To interrupt a synchro recording, W Recording from the microphone

6 When a sound, such as a person speak- ing, is picked up by the microphone, re- cording will begin automatically.

0 If a silence lasts for 3 seconds or more, the recording will be paused au- tomatically. However, the unit will not pause for about the first 10 seconds after recording has started.

To interrupt a synchro recording:

Press the ,I1 button while recording.

0 The Mic synchro recording mode will be canceled, and the unit will enter the re- cording stand-by mode.

0 To resume synchro recording, press the ENTER/SYNC button again.

To stop recording:

Press the U:OFF button.

W Recording from the microphone

(Mic manual recording)

0 You can start recording manually (any- time you like).

1 Put the unit in the recording stand-by mode. (Perform steps 1 --- 4 in the “Mic synchro recording” section.)

2 Press the ,I! button.

0 Recording will start.

To interrupt a recording:

Press the ,I1 button while recording.

0 The unit will enter the recording stand- by mode.

0To resume recording, press the )!I but- ton again.

The track number will be increased by one each time you interrupt a record- ing.

To stop recording:

Press the U:OFF button.

Notes:

0If you want to use a microphone, be sure it is a plug-in-power type microphone.

• When a plug-in-powertype microphone is plugged in, the main unit will provide power for the microphone’s operation.

•If a different type of microphone is plugged in, it may not operate properly or it may cause the unit to malfunction.

0 Insert the plug firmly. If you don’t, the recording will not be made properly. 0 Use a microphone with a 1/8”(3.5 mm) diameter stereo mini plug.

0While making a mic recording, do not connect anything to the LINE IN jack on the main unit.

14