Toshiba e-STUDIO161 1, 2, 3

USER SETTINGS

39

4

Resetting account

(program No.15)

The copy count of a single account or all accounts can

be reset to 0. If no account numbers have been

established, the error code "15E" will appear in the

display.

[Resetting all accounts]

Press the [1] key and then press the [START]

key ( ).

The copy counts of all accounts will be deleted.

[Resetting a single account]

1Press the [0] key, and then press the

[START] key ( ).

2Select the account number to be reset with

the [Copy ratio display] key ( ) and then

press the [START] key ( ).

Copying when "Auditing mode" is

enabled

When "Auditing mode" is enabled, "- - -" appears in the

display.

1Enter your 3-digit account number

with the numeric keys.

When you enter your account number, "0"

appears in the display to indicate that copying is

possible.

2Follow the appropriate steps to make

the copy.

3When finished, press the [AUDIT

CLEAR] key ( ).

To reset another account number, enter the

program number (15) for account number

deletion and then repeat the procedure for

"Resetting a single account".

Note

If you enter an incorrect number, press the

[CLEAR] key ( ) and then enter the

correct number.

If you are performing an interrupt copy

(p.28), be sure to press the [INTERRUPT]

key ( ) when finished to exit interrupt

mode.

If a misfeed occurs or the paper runs out

during copying, your session will not end

even if the [AUDIT CLEAR] key ( ) is

pressed.

Note

Note

Note

Contents

Main Page Page Page Page DISCLAIMER NOTICE CONTENTS 1 2 3 4 6 7 PERIPHERAL DEVICES AND SUPPLIES 8 CAUTIONS CAUTIONS ON USING Do not install your machine in areas that are: Warning: Caution: CAUTIONS ON HANDLING ENVIRONMENTAL INFORMATION Do not touch the photoconductive drum (green portion). CAUTIONS ON LASER Trademark acknowledgements USING THE MANUAL ABOUT THE OPERATION MANUALS Operation Manual (Multifunctional Digital System) (this manual) Online Manual (on the accessory CD-ROM) Printer Driver Setup Guide (separate manual) AB series (metric) and inch series references MAIN FEATURES High-speed laser copying High-quality digital image Enhanced copying features Scan once/Copy many 1 BEFORE USING THE MACHINE PART NAMES AND FUNCTIONS Page OPERATION PANEL Page POWER ON AND OFF POWER ON Turn the power switch to the "ON" position. POWER OFF Power Save Modes LOADING PAPER PAPER Special papers LOADING PAPER Loading the paper tray 4 1 2 1 paper width. 2 3 the way into the bypass tray. CHANGING A TRAYS PAPER SIZE SETTING 1 key ( ) for more than 5 seconds to set the selected paper size. 2 3 4 5 2 COPY FUNCTIONS 2 NORMAL COPYING Copying from the document glass 1 been left on the document glass. Close the ADF. 2 of the original(s). 3 Auto paper select mode (Two-tray model only) Removing the document cover Copying books or originals with folds or creases Originals that can be used in the ADF Originals that cannot be used in the ADF MAKING A COPY DARKER OR LIGHTER Original types 1 ( / / ) to select the original type. 2 REDUCTION/ENLARGEMENT/ZOOM AUTOMATIC RATIO SELECTION 1 feeder tray or on the document glass. 2 MANUAL RATIO SELECTION 1 feeder tray or on the document glass. 2 document glass, select the original size. (p.18) SELECTING THE VERTICAL AND HORIZONTAL COPY RATIOS SEPARATELY (XY ZOOM copying) 1 2 3 6 7 8 TWO-SIDED COPYING USING THE BYPASS TRAY 1 2 3 without changing the position of the edge closest to you, insert it in the bypass tray. DUAL PAGE COPYING 1 2 3 4 5 INTERRUPTING A COPY RUN (Interrupt copying) 1 2 3 3 PRINTER FUNCTIONS USING THE PRINTER MODE BASIC PROCEDURE FOR PRINTING 1 OPERATION IN COPY AND PRINTER MODES Chapter 4 USER SETTINGS ADJUSTING THE AUTOMATIC EXPOSURE LEVEL 1 2 3 TONER SAVE MODE AND HIGH IMAGE QUALITY MODE 1 2 3 4 CUSTOMISING SETTINGS (User programs) USER PROGRAMS Page SELECTING A SETTING FOR A USER PROGRAM 1 the alarm indicators ( , , , , ) blink. 2 numeric keys. SETTINGS FOR AUDITING MODE AUDITING MODE AUDITING MODE SETTINGS SELECTING AUDITING MODE SETTINGS 1 2 3 4 Auditing mode (program No.10) 1 2 Account number entry (program No.11) 1 with the numeric keys. 2 the copy. 3 5 TROUBLESHOOTING TROUBLESHOOTING MACHINE/COPYING PROBLEMS PRINTING PROBLEMS MACHINE/COPYING PROBLEMS Page Page PRINTING PROBLEMS Removing the software 1 "Control Panel". 2 3 machine from the list, and remove the software. INDICATORS AND DISPLAY MESSAGES MISFEED REMOVAL MISFEED IN THE ADF 1 Section A Section B MISFEED IN THE BYPASS TRAY 1 Gently pull the misfed paper out. 2 MISFEED IN THE MACHINE 1 A. Misfeed in the paper feed area 2 3 1 2 3 4 5 1 2 3 MISFEED IN THE UPPER PAPER TRAY 1 2 3 4 MISFEED IN THE LOWER PAPER TRAY 5 (Two-tray model only) 1 REPLACING THE TONER CARTRIDGE 1 2 3 4 ROUTINE MAINTENANCE CHECKING THE TOTAL OUTPUT COUNT AND TONER LEVEL CHECKING THE TOTAL OUTPUT COUNT [Total output count] Hold down the [0] key. ROUTINE MAINTENANCE CLEANING THE TRANSFER CHARGER 7 PERIPHERAL DEVICES AND SUPPLIES PERIPHERAL DEVICES AUTOMATIC DOCUMENT FEEDER Specifications 250-SHEET PAPER FEED UNIT Part names Specification 8 APPENDIX SPECIFICATIONS APPENDIX Printer Function SOFTWARE LICENSE Page INDEX